[Alternative LED]

retird said:

Please post a picture of your completed device as we like to see and share what others have designed.

Will definitively do that. Actual delivery time for the switches is 8-10 weeks. So it will take some time...

[Alternative LED]

Thank you very much Nick for the information. Looks great!

@retird
If anybody else now wants to do something like this the information is available for every one in here and not only in my email inbox.

[Alternative LED]

BillW50 said:

Brandon (from Evolv) just posted about the announcement of the new DNA60 just after your post.

So if customer support is held high there should be a reply. :-D

[Alternative LED]

ChunkyButt200 said:

this would be a question to ask evolv directly through their help ticket.

I expected Evolv to be visiting this forum from time to time and answer questions other users can't answer. Are they really not showing up here?!? 

<span>VapingBad</span> said:

There are some clear button out there that will do the job with no effort

Unfortunately not regarding my construction. I don't use the button on the board. 

[Alternative LED]

Hi everyone

I thought about using a illuminated switch with RGB capabilities. I will then connect the LED's of the switch to the pins on the DNA75 (after removing the existing RGB LED). Before doing so I need some specs regarding the LED.

- I need a pin-out of the on-board LED to see which pad is R,G,B and mass.
- What is the maximum current which could be drawn? The switch I found needs 20mA on each channel and I don't expect that this much current could actually be drawn (but would be nice tho).
- What are the voltage levels provided for each colour? The voltage levels on the switch I found are as follows: Red=1.8V; Green/Blue=2.8V

Here is a link to the datasheet of the switch I thought about using: http://spec_sheets.e-switch.com/specs/52-PV6F240SS3R1.pdf


Thanks in advance for answering my questions!