ibndevilsh

I have 26 gauge SS and will use 2.5 or 3 mm from coil master to wrap my coils. I usually build the kayfun V5 with 2.5 and my Squapes with a 3. I just wasn't sure what resistance I should be aiming for. I also won't go crazy torching it to clean it. I pulse with kanthal and never glow them. just heat it up enough to clean it and dunk the base in water to cool it and get the gunk off.

Boy I feel so stupid for asking this but if I don't ask I will never know. I'm new to building for temp control with SS. I have built for TI (Sweetspot) As I did the same build P.Busardo did for his kayfun. Still not sure what the most resistance should be for TI either. I have looked for single build for SS and not sure what Resistance I should build for. I'm not a sub ohmer or a big cloud chaser. What is the best resistance I should build for? I have googled and seems most do a dual build and I only use tanks that use a single coil. Also can you lightly dry fire SS to clean the coils? Do you do this to make sure you have no hot spots? I only build my kanthal and TI in spaced.

Thanks for the reply. I just wanted to know where to get one just in case something goes wrong with the one in the mod that I purchase. I have read some people had to get new batteries for the mods they did get.

I'm looking into buying a DNA 200 mod and the few I like all come with the 3s lipo pack but with a XT30 connector and all the batteries I looked at for a back up come with a XT 60. I don't know how to solder so does anyone sell them with the XT30 connector? I don't get why manufacturers say user serviceable for changing out batteries if you can't find the battery it calls for. Any help would be appreciated before I take the plunge.