hi, i'm new to titanium coils (been using ni200 for more than a year on a dna40) i built my 2nd Ti coil today and noticed something strange, i always have to intentionally raise (and locking) my resistance by approximately 0.03 ohms for the coils to work properly. i'm using steam engine's TFR (Titanium1) Profile Settings: 370F 17.5watts 30watts pre heat (punch at 11) steam engine Titanium1 TFR using my Uwell Crown Tank, my first build was: 24ga 6 or 7 wraps 2.5mm guide resulted at 0.35ohms cold resistance had to raise it to 0.38ohms second build: 24ga 5 wraps 2.5mm guide resulted at 0.22ohms cold resistance had to raise it to 0.25ohms the coil doesn't give me anything when i follow its true resistance (hits TP within 1second), but after raising the resistance by 0.03ohms it suddenly works great is this normal? or somethings wrong? thanks in advance guys!
