Jump to content
Evolv DNA Forum

kraze6548

Members
 View Profile  See their activity

  • Posts

    37

  • Joined

  • Last visited

    Never

 Content Type 

Posts posted by kraze6548

  1. Sweet Spot Vapors Titanium Wire - question

    in General Discussion

    Posted

    ssv wire wire is great. i been using it for months. few extra dolllars, but they provide custom csv and have great customer service. it performs better than the other ti wire i tried . everyone has their own opinion so not everyone will agree but i love it and use it on everything . i got 50 ft for 30 bucks and i am still on the same roll since september when i got my first dna 200

  5. Vaporshark DNA 200 Case Thermals and Battery Setting

    in General Discussion

    Posted

    they used 10.22 because they claim thats what they got after running anylyser. i think that value is the best case scenario . i also found that the .007 mod resistance they have is a little high. when i tested my pack i got 9.8 wh and the mod resistance came out as .005 so im now using those values. i also found that i needed to raise the cutoff to 3.2 or 3,3 because the cells become unbalnced with the stock 3.09 cutoff. since i made these changes my pack has been alot closer in voltage when im promted with weak battery .

  6. New here! Want opinions

    in General Discussion

    Posted

    I have 5 lipo based dna 200s that I love . The battery life isnt the greatest if u vape at higher wattages. On my vs200 with 900 mah lipo i get a full work day easily at 60 watts 500f with crown tank. On my psyclone evo with 1400 mah lipo I get a full and more at the same settings. I bought the wismec after hearing about people getting 2 plus days on a single charge. Problem is that running sony vtc4s and lghe4s I didnt get any longer out of the wismec than I did with the 1400 mah lipo box I have. maybe an hr or 2 longer at the most. on top of that the wismec had the screen ribbon cable under the fire button. the 510 connector was to shallow and only one tank and rda i have would sit flush on it, plus i had to wait forever to charge 18650s . I wasnt impressed with the wismec and it had to go. Im happy with the lipo versions of the dna 200. I have a lipo charger and my batteries can be fully charges in 25 to 45 mins depending on the mah. Its all subjective so if u are happy with the tug box i would keep it.

  11. Evolvs black reference mod!!

    in General Discussion

    Posted

    yes that's what ive found by charging on stand alone charger. my hcigar battery only took 1000 first few times then it increased to 1050 for about 5 more chrges . latest test was 1100 but they maxed out there. the battery's were horrible and became super unbalanced so i got the thunderpower and its been good . a lot more consistent power all day on 1 pack . on the stock hcigar batts  i was using 2 packs a day and the power drop off was noticeable at 50 percent.

  12. Evolvs black reference mod!!

    in General Discussion

    Posted

    i know and that was the first charge on the battery . glacier lipos got really good ratings and reviews. i read a few different reviews on them and they were always good.

    i just put some thunderpower 1350s in my vt200 and they only came back 14.20 on the first charge . and they have more mah than the glacier. only 50 more but you would think it would be higher

  14. Hcigar VT200 battery options

    in Batteries and Charging

    Posted

    i just installed the thunder power 1350 in my vt200. had to remove the plate separating the chip and battery compartment . had to shorten the leads from the chip and change the plug on the battery. i removed the tabs on the battery side of the case also. i removed the lipo wrapper and rewrapped it with electrical tape. fits good and i got 14.23 for the first analyser test 20151111_223727.jpg  20151111_223742.jpg  20151111_223851.jpg  20151111_223858.jpg

  17. Evolvs black reference mod!!

    in General Discussion

    Posted

    dont get me wrong if the same size 3d print wasn't 80 plus dollars i would have got one. but since i found these boxes for 55 bucks 68 shipped with tracking i had to go this route . the guy is great to deal with . i bought the black box prebuilt for 170 minus battery. took about 1.5 weeks from philippines . i put a 45 c 1300  glacier lipo in it for 15 dollars. i ordered another box this week for 55 it comes with the case and all the screws to mount chip and hold both halves together. its identical to the evolve case i believe except that its bigger on the battery side to fit the bigger battery. and the notches for the grip. i wanted an evolv box and this was the next best thing. hoping to grab one like u got soon. i have the vt200 i use as a work beater . but the reference box is one of my favorite designs. i love the one you have. i liked them raw but that black is sick

  19. Evolvs black reference mod!!

    in General Discussion

    Posted

    Mine were made by yosikideri on face book . I love it. The cnc job is super smooth . Plus the grip on the battery half gives it some style. Waiting to grab an evolv 510 to put in it. I have a grey version in the mail now that I'm gonna build when it arrives. Have all parts just waiting on the case. I was thinking about the plastic prints but im not comfortable having a lipo in an abs case.I got these aluminum cases  for 55 dollars . The ones on shapeways are too much money for plastic .  Ive seen to many lipo fires in the 6yrs i been using them. they were all in the rc feild but it happens quite often in rc cars so i opted for the aluminum version

×
×
  • Create New...