Jump to content

2005LGTL

Members
  • Posts

    7
  • Joined

  • Last visited

    Never

Personal Information

  • Full Name
    N.C.
  • Location
    Fl
  • What DNA product do you own or plan to buy?
    Triade

2005LGTL's Achievements

Member

Member (2/3)

0

Reputation

  1. What can i do? should i heat up and strum them until they space apart? I spent a lot of time evening the coil out.
  2. I have a very simple 14 wrap single coil with 20 ga wire. Im getting an issue where the coil is heating from the outside and a one or two coils on the middle right are not getting hot until a few seconds later. I took a short video of it happening. The coil seems even to me. What could i be doing wrong here? https://drive.google.com/file/d/0B_gWZS7t5hHkM2lGLVR6OHZ5Rkk/view?usp=docslist_api
  3. 30mm Mason RDA on my Triade DNA200. LG HG2 Batteries, currently built 20ga NiCr single coil with 12 wraps at .40 ohms. 60 watts seems to be the sweet spot. Peaks at 4.81v, and in the morning with my Pancake man, I back off to 45 watts and 4.2v. I also tried dual coils on these specs for .2 ohms, and it was great, but it slaughtered juice like a vaping Texas Chainsaw Massacre.
  4. It's the charger port. Stupid ass that I am I jumped to blaming the manufacturer. I never had this happen to the charger, and they were new batteries so it seemed like the mod could be the only possibility. All the batteries were at 3.8v, and I cycled the batteries through that port until it reproduced the issue of the battery reading full when it wasnt. I'll have to check my battery voltage every cycle now instead of every 3-4 days. It was confusing because the mod worked, if one sled lost connection I would think it would have been DOA. So good deal thank you for the kick in the ass. Currently puffing on a Mason 30mm with single 20ga/8 wraps at .35 ohms and some 3mg pancake man!
  5. I'm sorry I'm new to the DNA chip, and the manual doesn't say anything other than how to lock and.unlock the device, and change modes. Let me search for more advanced info and I'll get back here with what you asked me for.
  6. The vendor is trying to say it's user error but I can return it and if they decide it's user error I can't get a refund, and Lost Vape says iF the vendor refuses a return they aren't authorized and I'm SOL. How could a company that makes a product not even talk to you about it?
  7. I have a brand new Triade DNA 200 mod, and a brand new set of LG HG2 batteries. On two cycles so far, one battery will be fully charged when I take them out to recharge them. The batteries are all seated properly, and the device will not power on when only two batteries are installed. I've swapped all three and it will only power on when all three batteries are in. So why would one battery not be draining? I tried contacting Lost Vape, and they promptly and automatically replied that they don't help individuals, and that if the seller won't support the product, they are not authorized and I am, to put it simply, screwed. Def not buying a lost vape product ever again but if anyone knows a way to help me out I would be eternally grateful.
×
×
  • Create New...