omar
-
Posts
25 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by omar
-
-
just RMA it, open ticket, they will swap a new board for you.
That's a nice thing purchase evolv product.
I encounter that kind of issue last time.
-
May i know where i can find this connector..need it badly..my connetor got problem..Laguz75 said:You can install the cable in ether direction if you look at the past posts you can see that I used a connector on mine but i tried soldering a screen to the cable like iandvaypes and it is easiesr. Here's a pic of the connector which is the same on the board you can see it makes contact if you put the cable in ether direction
-
Oh thanks god. My ribbon and board are fine. Only issue with the screen. Mean i can buy direct from evolv. Better to deal with evolv directly. Because i have experience with evolv when handling my rma last time. Easy and fastest feedback. Because i stay at asian region. Always stuck with shipment issue charges. By the way thanks for ur feedback. Appriciate it.
-
Hi, Quick question. is it vs dna200 screen are same with normal dna200. Mine got problem and would like to change it. Already open RMA and still waiting reply from evolv. Hope someone can confirm it due to the board design from vs is different. I have different dna200 which is effusion, but scared to open and swap the screen scared will spoiled both of my mod. Appreciate if someone can assist me.
-
how about vaporshark dna200 screen, is it compatible as well.
-
Evolv swap me a new board a new version one..and now its work nice without any problem at all..love my dna200..
-
Already open the ticket and waiting thier reply..hope just after change the part and its will works..because its only minor issue on board..unless the board are fry..then will go buy another mod such as wismec realuex 18650..lipo give me headache..this is my 2nd mod of effusion..lost vape after sales service are poor..
-
I cant claim the warranty for this matters i guess..because the board is fine till the guys break it when mounted it in..i still wait someone can tell me the part number or at least the value of Inductor coil..
-
My effusion fuse blown..send to local eletronic shop to replace the 25amp fuse..its back like normal..but after a while i figured someting is wrong with the mods. When the mods go idle..its won't turn on..connect to escibe everything is fine..i try to dismantle the mod and find out the guys accidentally broke the Inductor coil on board..so i need to find a replacement part number for the inductor coil. Anyone can help me on this..much appreciate if someone can tell me the part number so they can replace it back.
-
Its not burn out..its physically broken when the shop guys try to dismantle the board..they accidentally break it..did email to evolv but still did not received any feedback by them..need to know the uf value or part number so they can replace it back.
-
Guys..need help..my inductor coil broken and i need to replace it..but i dont know the part number..can someone help me on this..
-
I find this on ebay..not sure same or not..
-
I find this one in ebay..but not sure same type with the original one on the board
-
I send board for replace fuse blown at local vapor shop..once i received its working but will totally off after idle and need to plug in usb to on it back..every time its on it will show low battery even i place charge until 70%. I try to disassemble back the mod to check the board and find out inductor coil is broken..so i planning to replace the inductor but im not what kind of inductor coil type to replace. Can someone help me on this..much appriciate..
-
I send board for replace fuse blown at local vapor shop..once i received its working but will totally off after idle and need to plug in usb to on it back..every time its on it will show low battery even i place charge until 70%. I try to disassemble back the mod to check the board and find out inductor coil is broken..so i planning to replace the inductor but im not what kind of inductor coil type to replace. Can someone help me on this..much appriciate..
-
Now im having an issue with effusion..my 1st mod work like charm for 2 days then suddenly blank.. then i return to the store for exchange..after 2 month use like a champ..but today its happen again..no screen but will power up when usb plug in..suspect the fuse blow..oh im so tired with this kind of problem..not sure dna board problem or lost vape problem..
-
Just build twisted 28awg using ud ss316l..build at kayfun..5 wrap 2.5mm diameter..and will became 3.0mm due its too springy and will get around 0.71ohm...use default profile from efusion made by evolv...fire at 30watt and tc set to 400f..i find my sweet spot.. Just to share..u guys can give a try..i can fell the flavour like i drink it..lol...
-
When a new firware will be released..i was waiting a new update and new things on the update..hope some surprises will be on my belove dna200..
-
Its supposed to have 8 profile, all u can set it up to make u easy to switch profile every time u change the atty.
-
When i use this profile, my battery will charge till 98% only and cut off, it wont reach 100% unless i change the capacity to 14.43 WH. Should i leave it set 13.68WH or change to 14.43WH.
-
Bobby said:
@dasfast: Thanks for the link. I did not use their ecig file but manually copied their case analyzer results.
(Hopefully they will upload version 2.0 soon since in this v1.0, the mod resistance value is still the default "0" and the battery discharge curve is not correct).
Try to check on facebook paga, dna200 theme, someone post the .ecig file, its more accurate compare v1 release by vaporshark page. -
Same thing happen to me, i owned efusion mod from lost vape, i able to use for 2 days and suddenly its blank, try to connect to pc via usb and try charge it, both were totally death. Try to contact local distributor, they also not sure what the problem and ask me to wait until they received a new stock for replacement. I think evolv need to step in on any of the mod manufacture to ensure they wont make a silly mistake during assembly the board that could give a bad reputation to evolv.
-
My efusion DNA200 by Lost Vape also having a same issue, more worse, just only can use for 2 days and die, try to connect to escribe, not detect. I dont know what is wrong. How its can happen. Faulty board or faulty assemble by lost vape. Very frustrating, contact supplier and they said no stock for replacement.
Dna75 drained my battery - fixing components
in General Discussion
Posted
Im sorry bro..coz im staying in asia, which is Malaysia. Last time I send by prepaid international postage for small packaging with tracking..and its cost me around 5usd.. then they will ship back to us with tracking with no cost at all..im so happy with their service.