Legros
-
Posts
16 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Posts posted by Legros
-
-
Check and add the mod resistance to the hcigar200 in escribe
Even 0.01ohm make big difference in temps with SS wire -
100% the battery
One of the cell must be saging more and hit soft cell cut off voltage -
Let it charge over night to balance the cell
It take long it work by discharging the high cell until they are in balance -
mknight said:
Forgot to say, I made a few screen changes that made a noticeable improvement in the battery life.
Changed the brightness to 40% on all screens
Changed the screen timeout to 1 second everywhere.
Stock 30 second timeout is ridiculous
At 40% brightness will be hard to see in bright sunlight
Adding a screen to my okr 50watt mod make me go from 3day to 2 day -
Would be cool but maybe hard to implement
And find kind of silly having the watts on big number on the charging screen
Would much prefer to have 6 custom field
to show all 3 cell volt and total volt , USB volt and current -
Can you add the option to select number off click to lock the device to 3 click
And when you lock to change temp or select stealt mode can it unlock after confirm -
On the MOD tab of Escibe you will see:
The Ohm Lock Range is what percent of resistance change will trigger the "New Atty" question.
In the above case of 25%, if the atty was originally at 0.1 ohms then 0.075 or 0.125 would trigger the question.
It the reverse if it more then 25% it will not ask new coil question -
John confirmed to me you need battery connection to charge and to display cell voltage correctly
https://forum.evolvapor.com/topic/68428-topic/?do=findComment&comment=915419 -
Connecter b+ /b- for the board to read correctly your batt
-
Can you make the charge screen not display watts and have 6 custom space
-
Yes it will work if wired correctly
But reverse batt protection look more complexe need like 8 mosfet to work for removable batt
3x18650 is pretty big and heavy lipos pack are way smaller + round cell = lot off wasted space -
If i plug only the balance lead got strange reading like cell 1=2.90v. Cell 2=4.43v cell 3=4.12v pack voltage=11.4v
When main bat lead connected all return to normal all cell=4.16v pack =12.48v
Vérified with multimeter -
You need to set charging brightness at less 35% to see it Stock is 0% Look at mikepetro picture in the left bottom is set to 80%
-
Good have some solder wick Thank you
-
Please help me-meant to cheer me up, but not even working with new battery.
in General Discussion
Posted
If the fuse is blow the screen will only light up when powered by USB On battery only board will do nothing