hill115side
-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by hill115side
-
-
SUCCESS, the pack is now fully charged and balanced. After I removed the pack from the mod, it still would not balance charge on the external balance charger. What I did was discharge the pack to the storage voltage level (3.8) and started a balance charge again, that seems to have done the trick.
Hope this helps someone else that has a similar issue.
-
I will, thanks.
-
I will do an external balance charge and then see what the percentage on the DNA is. Thanks for all your help.
-
Current screen for reference.
-
no, cell 3 will be around 3.9 and others are 4.2. I would assume that the pack percentage would be higher than 70% at that point.
-
No, it will not balance charge in the device. The best I get is 70% in the device.
-
Also, I have balanced charged my lipo a few weeks back and still the percentage was not 100%. After the balance charge, all cells where at ~4.2.
-
running the analyzer now.
-
My CSV file is really close to yours.
-
I have a DNA250C with a Hyperion 2800mah and looks like the charge percentage is off.
I have added an image from the Device Monitor screen for reference. Has anyone else had this issue and what could I do yo fix it?
-
My battery is charger to 16.65v and the percentage is 85%. Like the DNA200 you can set the watt hours of the battery, but on the DNA250C you can not.
Let me know if I am missing something.
Charge percentage is off
in Modders' Forum
Posted · Edited by hill115side
The pack has been sitting the mod plugged to the charger, the battery is currently at 98%.