Rain
-
Posts
19 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Rain
-
-
and it is alive and working
did forget to take pictures of internals, but I did the same as ChunkyButt200, everything else is quite straight forward
one pic of finished product
-
1
-
-
I believe this is my 7th one over all
I did put an order for 3 screens now, just to be safe -
I did manage to solder it today. Board was recognized in escribe, battery charging working as far as I can tell.
But, when assembling VF I did manage to brake screen
Ordered new one, when it arrives this will be finally done.
-
great, this is much appreciated
I will work some more on in in next few days when I grab some time for it
And, hopefully, my VF will have dna60 heart after this experiment -
ChunkyButt200 said:
one board has the RBP buzzer and one of the two charging IC's. the other board, on top of that board, has the second charging IC and the battery leads soldered to it. you would need to de-solder these two boards from each other and take a look at the USB pin out. you're going to have to do what i did when i decided to keep my VS DNA 40 daughter board. here's a photo of what i had to do to the USB (your USB socket will look similar to mine, our daughter boards are different but that is irrelevant). i will also personally help you through this if you decide to go this route.
I will manage to do it in the same way that you did.
Did you use 10k ohm resistor? -
thanks for pic, I will give it a go tomorrow
-
This is how charger board in VF looks like. To be honest I don't have a clue where to look for USB pins
-
ChunkyButt200 said:
there are ways around having to use evolv's charging/data board. it's not an absolute must have. you can use the USB that is already inside the VS Vaporflask. the data pins might not be connected, but i guarantee you they are there. it all depends on your soldering skills and if you want to take the time to do it.
I was taking a quick look to that today, original VF is using two boards, I am guessing one is for charging and another for protection, but I don't see any pins on boards for data transfer. I will try to find out tomorrow which boards are those exactly and how to solve data transfer via them
-
retird said:
Protovapor ships with USPS. How are items ships from your country? How much does it cost to ship something from your country to Hawaii, USA?
8$ tracked and ensured shipment to USAOr, another example, shipping from modcrate is 15$ for their Silo950 which is about 30 times heavier then usb board and they are using USPS as well
-
they don't have USB data/charging board
only charging boards which I do have at home
-
$34.15 shipping to Europe for something that costs 5$ is not really good.
I don't know why protovapor has such high shipping cost
-
I did search on forum but I didn't find information I was looking for so...
Where to heck could I buy Evolv USB charger for DNA60?
I do have 1A ones, but those are only charging boards and I need new one with EScribe compatibility.
And I cannot find them anywhereAny sugestions? And I am looking for Evolv one because it will go into vaporshark vaporflask and easiest to do it is with original one
-
ermm, maybe I missed this somewhere but
(2) support for "Hold To Change Material", "Hold To Change Power", and "Temp Locked Hold Up Down" screens,
what should I hold to get those two options? -
Thanks for explanation. I will try it a bit later.
-
I was playing today with escribe and found that one thing is not working or I don't know how to use it-
On tab "Screen" there is option to chose what should be shown in field 1/2/3.
When I change default field everything is OK, data is changed.
But when I change something in charge field nothing changes on DNA screen when unit is charging.
Did anyone else experienced the same? -
it is working
-
there is fatdaddy 510 for wooden enclosures.
this is how it looks like on my mod
-
I can just hope there will be option to buy vaporflask with dna200. That is my favorite mod form
Early Firmware and EScribe Suite Discussion Thread
in EScribe, Software and Firmware
Posted · Edited by Rain
I wasn't following the whole topic, but I see that there is boost option now in DNA250 which is great, I love that option on my 75C.
Is there a plan to release the same option for DNA200& DNA75?