Smeef
-
Posts
21 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Smeef
-
-
Just finished it up tonight.
Alpinetech 1550 P+
Varitube 14mm 510
Powerhobby 1500 mah 45C lipo-
3
-
-
So I got an email back from Evolv. Apparently back in August they made what they are calling the DNA200 V2 board. It's similar to the DNA250, minus some components that the 250 has.
-
It does not power at all on USB only.
-
Yes as soon as I hear something from them, I'll post it here.retird said:@Smeef, would you be so kind as to post what you find out.... would be good info in case others may run across this situation.... THX
-
I tried charging it on a 2A wall charger and it still only charged at 1A. I tried to input 166W in Escribe for max wattage at the kanthal power limit, but it still restricts the mod to 133W. I have it in 2S configuration.
I re-opened my ticket and sent them an email to see what they say.
EDIT.....When I tried changing the input amps, as soon as I click outside of the box, it reverts back to 24A -
It doesn't make sense to me neither. When I sent my 200 in, I emailed them and asked them if it could be replaced with a 250. The gentleman told me that it was not possible. I opened the box today and was actually shocked they sent what I thought was a 250, until I hooked into Escribe.
-
And battery settings.
-
Here's the USB boxes ticked.
-
Also this is what I get when I retrieve the device information.
-
That's the only one I have of the front. It's in the mod now.
-
-
That is what I'm thinking yes. I sent them a 200 and got a box with a 200 label on it, but the picture I posted is what was inside. Everything in Escribe points to a 200, while looking at it points to a 250.
I'm not quite sure what that person in that thread really had to do. I swapped out a Hobo X DNA200 with a 250 board and had to modify nothing. It could just be whatever mod he had, the makers had some type of screen mount that attached to the board itself which yes, there would be extra bits in that area.
I'm not unhappy by any means. Just curious if this is a way for them to phase out the 200. Replace all old 200's with a 250 and leave it up to the end user with a firmware update. -
I'm not really sure what you intend for me to gather from that thread. I read that earlier. You mentioned someone possibly mis-labeling a board so I posted a pic to show that it's more than just a mis-labeled board. The layout and components match that of a 250.
-
Possibly but it's laid out just like a 250 is.
-
Yes I tried it that way. Still limited to 1A. I think they are just using the 250 board for the 200 firmware to gain the better fuse maybe. I'm sure it's easier as well to have one universal setup for both versions.
-
I already know that it's a 200. Tried everything in the possibility is was a 250.
-
Still limited to 1A charging Wayneo and no Retird, it will stop at 200/133.
-
I did yes. It's definitely a 200. I'm not upset because that's what was warrantied. Just wanted to see if anyone else has seen this. I was actually kind of hopeful it in fact was a 250.
-
It was a 200 warranty replacement. The board itself has DNA 250 written on it and the fuse is the new style and everything. When hooked up to Escribe though, it comes up as a 200.
I wondering if they are just using one board now for both. -
So I just got a replacement 200 from Evolv and the board itself is a 250. When hooked up to Escribe it reads as a 200.
Has anyone seen this yet? Wondering if the did away with the old board seeing that the 250 is a bit more robust.
Points in battery discharge profile
in Batteries and Charging
Posted
I've searched, but couldn't come up with any real answer. Is there any advantage to adding or reducing points within the battery discharge profile?
More accuracy of the meter possibly? Just a thought that popped in my head today.