Jump to content
Evolv DNA Forum

shehabismail

Members
 View Profile  See their activity

  • Posts

    55

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Posts posted by shehabismail

  3. Weird battery issues with DNA250C

    in General Discussion

    Posted

    36 minutes ago, BillW50 said:

    Are you firing to make those spikes? Or is this from just sitting there?

    There is a tiny pin when you open the battery door that springs up and down. Make sure it isn't stuck down. Then I would clean the battery contacts with alcohol and make sure it is dry and try it again. I don't have much hope that will take care of it. But it is the first thing to do.

    Not at all, its idle and everything is cleaned already. multiple sets of batteries show same behavior

  4. Weird battery issues with DNA250C

    in General Discussion

    Posted

    Hi

    So I have a Paranormal and Centarus DNA 250 C, I am getting weird battery readings like 19% while its full and i am using the correct battery curve csv. Batteries work fine on other mods and i tried 3 different sets. When i am looking at Escribe i see this. both batteries read way below the 4.2 and they are both freshly charged, one of them keep on dropping to 2. something and then back up to 3.4, any idea what is going on?

    Screenshot 2021-11-19 204335.png

  6. DNA 200 Battery Discharge Profile

    in General Discussion

    Posted

    After months of trial and error i finally fixed it, its  a weird fix but hey it worked, so i am just dropping it here for the sake of helping any other user with this weird issue

    The problem: Cant load any battery profiles into the mod through escribe, you can see it on the first post where its "dimmed" and the buttons where you want to load a csv just wont load the window where you choose the csv from

    Tried: Resetting, hard reset, reinstall escribe, different cable, different pc all together, nothing, i have a lot of DNAs and this specific one was the one facing the problem, any other one worked normally

    Fix: Change battery type from Lithium Polymer to LifePo4 as soon as you do that, the graph shows again, change it back to Lithium Polymer and the graph remains and you can load your csv normally now and upload it to device, i think this is a bug and would like Evolv to take a look at it and even if they want to collect logs from me, no problem.

  12. DNA 200 Battery Discharge Profile

    in General Discussion

    Posted

    Hello, this is not device specific. I moved the board from a VT133 (still had this while the board was installed on it) to a Therion (same after moving). It is not that I cant add the CSV. The buttons themselves dont do anything when you press them. Any opther DNA 200,250 mods/board works normally, when I click on load csv the Window opens that asks for the csv. In this specific DNA200 board when i click Load nothing happens, as if i didnt click it, i dont even get prompted to provide the CSV. Its just that. As if you didnt even click it, and this is for this whole area.

  17. Check atomizer

    in General Discussion

    Posted

    10 hours ago, retird said:

    The check atomizer message can mean several things.  Maybe the device is built different than the 200 and 250 you have (the 200 and 250 don't have replay either) and there is a connection issue with that atty which will give a check atty message..  Can you put the same coil in a different atty and try it? Note that some atty's don't play well with replay..... here is a link if you choose to visit.....  your atty may, or may not be one shown that doesn't play well with replay...  https://forum.evolvapor.com/forum/42-replay-and-atomizers/

     Does it work just fine while vaping in TC mode on the 250C?

    Atty works fine on other DNA devices in SS316L Temp control.

  18. Check atomizer

    in General Discussion

    Posted

    On 8/4/2019 at 11:16 AM, retird said:

    Many, many posts here about contact coils and DNA technology....  I offer a suggestion to try a spaced coil as many have found this solves their issues.... Good luck...

    tried spaced coil. same issue. this is so frustrating, same clapton builds work fine on my other dna 200 and 250

  22. Check atomizer

    in General Discussion

    Posted

    Hello, I am using a clapton ss316L from advanced vape supply. When I am on replay mode, the first puff i like then i click save puff, then when i fire again it says check atomizer, replaced the coil and still same behaviour. Works fine in wattage mode. When I try SS316 it always says temp protect from the first puff. I am running latest software

×
×
  • Create New...