Wicked0ne
-
Posts
13 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Posts posted by Wicked0ne
-
-
It seems to read the wrong temps. The last screenshot is a fresh SS316L 24g, 3mm ID, 8 wrap twisted dual coil on my OBS Engine.
How can I do a resistance test? -
-
Yea, I only have 336L and kanthal so I haven't tried any other TC materials. I've tried 3-4 different SS316L single strand dual coil builds and 1-2 SS316L twisted builds. All 24 gauge.
-
I hate to bump, but this thing is still not staying in tc mode. Sometimes tc works well for a hour or so and then stops using tc mode. Sometimes it senses the wrong temps and think it's 600F+ and only using 1-2watts. This is becoming quite annoying and I'd like to solve the issue.
-
-
Well, that's part of my issue. Those coils SHOULD be right around 0.21. This problem has been ongoing for a few days and I have left the device and atty alone for hours and it may or may not ask me if there is a new coil. If it does ask me and I select yes, shortly after it will go back to only firing at 1-10w's, like it using the wrong temperatures.
-
Yea, 91% iso on a q-tip. I cleaned the pin on both device and atty. Checked all the screws in the atty. When I tried to attach a different atty(that also had the same ss316L wire) it did the same thing. Pops out of TC and uses watts.
-
I tried setting the ohms like you said and uploaded it. The first time I fired it, it popped out of TC.
-
-
-
-
I'm having this same exact issue myself.
- Therion DNA75
- OBS Engine
- SS316L
- Twisted Coils(24g x 24g)
- 24g / 3mm ID
- 6-7 wraps
I have tried a few different settings for this profile. Within the last few days it will either not stay in TC mode or it will detect the wrong resistance and use like 1-5 watts producing no vapor.
Temp Control issues. Therion DNA 75
in General Discussion
Posted
Thanks giz! I tried that out and my temperatures where just all over the place. They would vary from 0.008-0.03.