Jump to content

Wicked0ne

Members
  • Posts

    13
  • Joined

  • Last visited

    Never

Everything posted by Wicked0ne

  1. Thanks giz! I tried that out and my temperatures where just all over the place. They would vary from 0.008-0.03.
  2. It seems to read the wrong temps. The last screenshot is a fresh SS316L 24g, 3mm ID, 8 wrap twisted dual coil on my OBS Engine. How can I do a resistance test?
  3. Yea, I only have 336L and kanthal so I haven't tried any other TC materials. I've tried 3-4 different SS316L single strand dual coil builds and 1-2 SS316L twisted builds. All 24 gauge.
  4. I hate to bump, but this thing is still not staying in tc mode. Sometimes tc works well for a hour or so and then stops using tc mode. Sometimes it senses the wrong temps and think it's 600F+ and only using 1-2watts. This is becoming quite annoying and I'd like to solve the issue.
  5. Well, that's part of my issue. Those coils SHOULD be right around 0.21. This problem has been ongoing for a few days and I have left the device and atty alone for hours and it may or may not ask me if there is a new coil. If it does ask me and I select yes, shortly after it will go back to only firing at 1-10w's, like it using the wrong temperatures.
  6. Yea, 91% iso on a q-tip. I cleaned the pin on both device and atty. Checked all the screws in the atty. When I tried to attach a different atty(that also had the same ss316L wire) it did the same thing. Pops out of TC and uses watts.
  7. I tried setting the ohms like you said and uploaded it. The first time I fired it, it popped out of TC.
  8. I'm having this same exact issue myself. Therion DNA75OBS EngineSS316LTwisted Coils(24g x 24g)24g / 3mm ID6-7 wraps I have tried a few different settings for this profile. Within the last few days it will either not stay in TC mode or it will detect the wrong resistance and use like 1-5 watts producing no vapor.
×
×
  • Create New...