ClintMaas
-
Posts
23 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by ClintMaas
-
-
Thanks for your inputs. I always have three wallwarts at my desk and the one I was using just happened to not show anything. The other two do show a charge current (a Samsung and Apple).
I do notice the charge rate doesn't show the full 1 amp like you said James but it works at least. I sometimes have issues with my car charge part and on the old boards, I always had the rate visible...just to show it's actually charging.
But to whoever was involved with the screen development, well done! I do industrial HMI development for a living and I am impressed. Even caught myself editing themes on one screen while doing my "job" on the others yesterday.
-
Is there a way to show the charging current when not connected to your PC? I added the charge current which works fine when plugged into the PC but not when charging via wall wart.
I'm only about three hours in of owning a "75C". Just messing with current themes before trying my own.
-
I may have to add another for then it's charging. I'm guessing that output is 5v? I'll have to get the meter out later and check. But I do like how the vaporshark shows it's charging.
-
I just made a post about LED now asking a couple different questions but somewhat related to your question.
I did mine soldered directly to the fire button and that is a active high +12vdc. What I asked is what the limit is for current draw from this location. The only disadvantage is that its active even of the board is locked.
Here is the link to it in case responses may help you out as well.
https://forum.evolvapor.com/topic/67065-topic/?do=findComment&comment=903675 -
I looked through the other two or three posts about the LED and mine is working great however, just a couple questions I didn't seem to find in them.
Are the small pads above and below the fire button active high in both locked and unlocked mode?
I soldered mine directly to the fire button and i don't mine it lighting even in locked mode but just curious.
And lastly, is there a safe current limit to be putting on the fire button connection point (or small pads).
Thanks ahead of time and just want to confirm these things since a few of our group members are also interested in doing this.
-
Will the single cell firmware update be available when the hcigar DNA 75 is released or before? My device will have a 18650 option in the next couple weeks and am intrigued but the news of the DNA 75.
-
May I ask how long it took to do one cycle of the test?
-
Sounds good chippie. Those are pretty much the only ones I use now and never took the time to see how they did it. It's probably proprietary but would be great for our mods. I know when my phone is super low, it charges hella fast.
-
I didn't see anybody ask about this yet and wondered if there are any issues with charging using one of the Samsung fast chargers (Adaptive Fast Charging/Note Edge).
I understand how a device only takes what it's specified at but I'm not sure how this works if you also are feeding an additional 9 volt supply with the 5 volts. -
I do industrial programming and it would be really cool to be able to grab serial data and do long term trending on a factorytalk historian. Not that I need this but would be interesting.
-
Mad Scientist said:
I'd also be very interested in the interface specs. I really want a wireless interface between the PC and the DNA. I can do a wireless serial interface. Hopefully for this it's a couple of USB to serial converters, a couple of PICS and the radios? Is all the data communication CLI?
I really want a way to go wireless as well. I just haven't found anything easy (small dongle). -
alee132 said:
I agree with you there since its onboard and in my past experience the usb connectors can break off if your not careful.
I am usually very careful and haven't broken a USB connector yet. I primarily just want it to be wireless for convenience. Seeing how you can trend real time, I'd be trending all the time. I haven't looked much more on an adapter but I still want one if they are available. -
Maybe a mod builder/company could just use a very small three cell lipo and program in a lower max power (which can be done anyways).
Evolv could go the way of GPU manufactures and use a common board and just de-tune the chip. I am sure Evolv is not interested in making a completely new board.
Personally, I think just using a small form factor lipo and setting the max wattage down would be fine. How long would the battery last at lets say, a 500mAh lipo at 60 watts? -
MADMODDER said:
Are there going to be some kind of data to enter the values for using titanium coils avaliable or an update for this..i know there are the custom coil settings but need data to configure for titanium use
I agree with Macz and also there is at least one titanium vendor who stated that he was going to have specific values for their wire. It would be in the end if all wire vendors do this. -
basilray said:
[QUOTE=SSV][QUOTE=blueridgedog][QUOTE=John]Yes, we are very much hoping that wire suppliers will publish compatible curves that match exactly the wire they are supplying.
This is a real sleeper that I don't think manufactures of mods or related items are getting just yet. This will take the guess work out of selecting and using wire and should be a game changing concept.
It will have to get out of the geek world to be effective, with point and click web integration (buy this wire, click here to automatically add a profile for it...etc).
[/QUOTE]
We def. are getting it. Already working on it. We'll provide a unique profile for EACH one of our wire products. User downloads into their device and hits the ground running, with a "guarantee" that the temps are calibrated (as close as they can be with this type of topology).[/QUOTE]
This is why I've been asking you for the TCR.
[/QUOTE]
Is there a location that custom TCR's will be posted from wire manufactures? -
John said:
The portion with the battery meter paints on top of the image, unless you have it selected to do otherwise.
Make the screens as you like, and then leave space for the battery meter if you want to display the battery display on top.
Thank you John. -
I'm sure I am just too tired but I was messing with the custom screens and noticed the battery meter on most of them. With the meter being dynamic, how do I make a new screen?
-
I've read that a Wireless USB specification exists but does anybody know of an actual product available?
The reason for asking is that I think some people will be obsessed with monitoring (I know I will be) and I know I'll be worried about damage to the connector.
-
Hello all. I am from Wisconsin and have been using a DNA 40 since January 3rd. I do not have the DNA 200 in my hands but I did do a pre-order on one of the Whiteout DNA's.
John, you're seriously the mad scientist creating this thing. Now I will be spend countless nights playing with the software. I do find it great that all of the people's comments in the past of "not having this..or..or" has completely changed now. I hear around about why a person would need 200 watts. Well, my car can go 150 but do I?
Well done Brandon and John.
75C - Display field - Charge current
in Themes and Custom Screens
Posted
Now to stop editing other's themes and make my own. ..the overlaps are the batt/charge fields. I do see how it can be done another way now. <---NOOB