[2s 18650 discussion]

Oh my god, I'm stupid!

I bridged the 2nd and 3rd pin, which I just realised, are pin 1 and 2. That's what you get for not double checking. Now let's see if I can undo that mess...

[2s 18650 discussion]

It's a 2 cell battery sled wired in series (like your post #69 in this thread)

[2s 18650 discussion]

Hello, I just ran into a weird problem.

I've got a Whiteout DNA200 and just tried to reconfigure it for 2s.

Now, as I understand it, the board should read battery 1 and 2  as whatever voltage they carry, and battery 3 as 0V. In my case, it reads battery 1 and 3 as carrying voltage, and battery 2 as 0V.
Is it possible to switch battery 2 and 3? I don't think my wiring is off.
(I bridged pins 2 and 3 and connected both cables to the bridge on the battery sled)

If I connect the 3s LiPo, it all works.

BTW, when I set it to 2-cell in Escribe, the device shows pack voltage as 3.7V
set to 3-cell, it shows 7.4V.

Thanks for your help.