Hello, I just ran into a weird problem. I've got a Whiteout DNA200 and just tried to reconfigure it for 2s. Now, as I understand it, the board should read battery 1 and 2 as whatever voltage they carry, and battery 3 as 0V. In my case, it reads battery 1 and 3 as carrying voltage, and battery 2 as 0V. Is it possible to switch battery 2 and 3? I don't think my wiring is off. (I bridged pins 2 and 3 and connected both cables to the bridge on the battery sled) If I connect the 3s LiPo, it all works. BTW, when I set it to 2-cell in Escribe, the device shows pack voltage as 3.7V set to 3-cell, it shows 7.4V. Thanks for your help.