promod2000avenger

Thank you James. I had a feeling that's what it was.

Anyone have any idea why this DNA 250 Color has this error message about the clock and date ? Can't set time and date in settings. Can't connect it to escribe due to version for 250 Color not available yet.

Pretty sure it's the same screen that 75C uses. As for specs that's on lock down for now.

Brown..... Your computer has corrupted drivers. First try installing escribe on a fresh computer that has never had it installed. Works every time.

Yup Just One Thought. RMA

Oh I totally agree lewis Brandon and john and the whole crew at Evolv have been the greatest. Brandon has helped me out immensely. So I mean no insult just kinda bummed the rig is down.

Board has been good till now but did have a service warranty message some time ago. But upgraded firmware and been great since. Board totally died today. Full battery was vaping at 100 watts with a .16 build took 2 hits and died on the 3rd hit. Nothing on the screen. Connected it to Escribe and nothing. Took the mod apart and desoldered all connections and connected usb and still nothing. Fuse still good tested both sides of fuse and all is good. Visually inspected board for burnt components and can't see any. No burnt smell at all. I do believe brandon was right when he told me that with the service warranty message the board will eventually die. And It did just that today. I have the RMA form filled out and chip all boxed up and getting ready to ship back. Included copy of receipt. Brandon Hope we can get this taken care of in a timely manner. Walt Reed

You may not have pinched the ribbon cable with the fire button. But you prob have a short where the ribbon cable connects to the screen. This is a very fragile connection at the transition from ribbon cable to screen glass. The factory adds a type of epoxy they call it. I call it more of a silicone. Where the cable meets the screen. I have also noticed the factory has put a piece of black tape on the opposite side from the epoxy. The epoxy is on the wrong side and the tape is too. What I do is remove the piece of tape carefully and use some REAL epoxy to replace the tape. This helps to stiffen up the connection. My suggestion to you is replace the screen and use the epoxy where suggested.

Just wanted to give a BIG SHOUT OUT to "Turbocad6" i.e...john THANKS SO MUCH for all your HELP & Support !!!! Your a Gentleman & Scholar !!! Received the 2 Items in Perfect Condition. Walt

The screen ribbon cable is pinched by the fire button. I know this for a "fact". When the cable gets pinched it will "definitely" cause the warranty service message to be displayed. And show a half glitched screen just like your picture. How do I know this for a fact ? Because it happened to ME. Evolv says it out of calibration and needed to be sent in for service. If it was out of calibration I don't think it could fix it's self by just changing the screen and upgrading the firmware. Not trying to contradict evolv just stating facts. But before I sent it in I replaced the screen and used 8/21 firmware and BINGO works great NO problems any more. That was "months" ago.

lewisss Thank you I already know about the fields settings. But there is no setting in there to keep the "(Last)"voltage on the screen. You can keep the "Last" power......"Last" energy......BUT NO "Last" Voltage

James There is one feature I think we all would like to have. What I would love to see is the volts shown continuously without having to push the fire button. Please everyone that agrees give this post a SHOUT OUT.

You stated all 4 of these are from EVOLV. So are you saying EVOLV made 4 different size reference enclosures ? Not that I knew of. They only made 1 size. The small 900mah one. Maybe I am incorrect. If I am please correct me. Walt