Jump to content

ravin187

Members
  • Posts

    10
  • Joined

  • Last visited

    Never

Everything posted by ravin187

  1. Again I must say "duh, I shoulda known that." Thanks!
  2. and definitely not enough room for an adapter.... would it be much of an issue going from the much higher gauge wiring on the turnigy (or at least it looks bigger) down to the 18awg that run to the board?
  3. thanks. dimensions are the same. and dammit it is an xt30 in the mod.
  4. no offense at all, I should know better! would this be a suitable replacement? https://hobbyking.com/en_us/turnigy-nano-tech-1300mah-3s-25-50c-lipo-pack.html would I have to change any setting ins escribe? thanks so much. I hope the charging issue is related to the bad batt!
  5. sorry all very important thing missed! lost vape efusion duo. battery is fully max 1300mah hard reboot sometimes fixes it but seems to NOT happen when battery is >80% full. I have done the usb recovery charge and that doesn't seem to have fixed it. your input is VERY appreciated.
  6. I hope someone can help me here.... I have the following constant issues: 1) battery constantly starts and stops charging. a hard reboot seems to take care of it for a while. 2) when I fire the mod in power mode (temp control off) the wattage drops off rapidly even with a mostly charged battery and the batter icon flashes. hard reboot fixes this also for a time any ideas what it could be? thanks in advance!
  7. my crappy computer would only charge at .5 amps but the board temp was 84 degrees. I've tried charging it with the back off and the battery pack hanging out to get more air flow around the board and it's still starting/stopping. it doesn't feel hot... to my extremely uncalibrated finger. put the temp on the screen for charging. and it's been going a while and is at 93.4 and working fine... I have never gotten a "too hot" error.
  8. the cables I have are 2 amp rated. but my usb ports aren't usb3....
  9. Hi, would love some help on an issue I'm having.... when charging my lost vapes efusion duo my device keeps stopping charging then starts again over an over. it eventually charges in full but is slow as it keeps starting and stopping. I've tried multiple cables and plugs (into the wall). Seems to only happen with 1 amp cords? and here is the most important part.... NOT everytime I charge it!!!! any guidance would be helpful! thanks
×
×
  • Create New...