tramog
-
Posts
21 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by tramog
-
-
I will do it. Thank you @Wayneo.
-
Hello, a question for Evol: is an upgrade of USB to type C planned? Thank you.
-
Upload the default theme and try again with 316L.
-
Try setting the Warmth to a minimum.
-
Thank you. I will also do a trial.
It remains a "mystery" about its purpose and why it was inserted under "Ohm Lock Range".
This check is only on the 75C. In the old 75 B/W it does not have it. -
Thank you. So you want to say that if I do a coil in Kanthal this does not work even if I do not use the temperature control but only VW?
I do not understand the purpose. -
-
Have you tried to change the USB cable?
-
Thanks to Evolv for this update.
-
I confirm, even my Mirage has an internal resistance of 0.004 ohms.
-
My Mirage 75C has an internal resistance of 0.004 ohms and, so far, it did not give me any problem.
- 1
-
Any technical explanation on how the Replay Mode will work? Thank you.
-
Nothing serious ... but on my box with DNA 75C known that the battery charge level stops at 98-99%, never ever 100%. It also happens to me if I insert batteries previously charged with an external battery charger. Performed the "battery test" for both batteries (Samsung 25R and Sony VTC5A) ... nothing, the boxes signal me to charge battery (green led) and 98% charge level. Does it happen to you too?
- 1
-
It depends on how the profile is set. For example: if you choose kanthal or Watt automatically you can only set the punch.
-
Escribe theme designer.
Preheat: How is it possible to choose between Punch or Temperature? Is not there an option to do this?
DNA & USB type C.
in General Discussion
Posted
Thank you @retird