mstave
-
Posts
68 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Downloads
Posts posted by mstave
-
-
Ever since the update, when I use the thermal case analysis, the new tab showsmup as a very small square and I cannot maximize the view - still works, just can't see progress. Anyone else having this issue with the intl version for windows?
-
had a similar issue using the bridgs in a boro tank, resolved it by tightening the top nut that locks the boro in place with a wrench.-
1
-
-
True, unlikely they are close to the actual profile, they never are in ny of my other dna mods. After doing a bit of reading, looks like the dna60 predated the escribe software - the sort of legacy board that might produce artifacts like a funtional thermal profiling unit, without any applicatoin to this chip. Oh well, works more of less.
-
Thanks dwcraig1. Seems a bit strange to enable the functionality in escribe. The program obviously detects what chip has been connected to the computer, why not just disable that portion of the settings?
-
Anyone have a thermal profile for the SXK BB DNA60, or know how to useescribe to get one?
-
14 minutes ago, Zak2017 said:
Here is a cheaper price:
https://www.eightvape.com/products/lost-vape-triade-dna-250-250w-tc-box-modpreorder
It certainly is. I generally give this vendor a pass.
-
22 minutes ago, Zak2017 said:
Hey Zak - thanks for the tip - ordered!
-
I cannot recommend VapeSourcing as a vendor - I have purchased from them about 20 times, and had quality issues with three of the products they sent me, all shrink wrapped items. They did not respond to emails until called out on social media, and only then offered compensation or replacements. You can do better
-
1
-
-
1 hour ago, Juvenile43 said:
My order from hotcig now says "order prioritized" under collecting items. Whatever that means. Its just BS that they never listed it as a preorder even though they had none in stock. How long did it take for you to get your refund? For now im gonna keep the order but if there is any other lie i will get out.
They haven't refunded yet. Sent me an email asking if I wanted to wait til next week. I said no, refund me now. I am also paying $50 less at 2fdeal.
-
23 minutes ago, Neilshaw1980 said:
Think vape commented on their Instagram account saying it will be released today (Friday)
I have no doubt that Think Vape will be getting them out. It's just Hotcig (or focalecig, whatever they are called) that I don't believe - at least three people, including me, have received three different stories - I hve no trust in them at this point. I bought mine for $50 less at 2Fdeal
-
VapeSourcing has the Paranormal 250C for $118 + shipping, but with the coupon code "STPatrick" the total comes to $111
-
6 hours ago, Juvenile43 said:
When asked if they had stock this was the reply from 1 day ago. Finder 250c.
Dear valued customer,
Thanks for your support on HOTECIG, the item 67151 in your order is out of stock now , the supplier will be released the item next week .then we will ship the package asap, hope you understand . have a nice day ,
Best Regards
HOTECIG TEAMI have canceled my order. I I do not believe them. 2fdeal and 3fvape both have this mod for $118, and advise that they will have them to ship on April 10
-
21 minutes ago, X-R4Y said:
Does this have the replay feature for DNA75C also?
I can't tell for sure, there are some references to it, but I don't think so
-
17 hours ago, Juvenile43 said:
At least im not alone. I ordered the black though. Let me know any updates to your status ill do the same. What shipping option did you do?
Hotecig says it'll ship next week:
Carina <sales@hotecig.com>
3:38 AM (4 hours ago)to meHello,your parcel will ship next week.I wish you have a good time.
-
7 hours ago, Juvenile43 said:
Also found this not quite sure how the site works because it looks like you name your price???? But it seems to be an exact clone of hotecig.com
http://wallbuys.com/Product/Authentic-Think-Vape-Finder-DNA250C-300W-TC-VW-Box-ModBlack-67151
Looks like an exact copy. Not touching anything from this site
-
17 minutes ago, Juvenile43 said:
At least im not alone. I ordered the black though. Let me know any updates to your status ill do the same. What shipping option did you do?
Went with DHL, added the 5% discount code and picked up a cloned dual coil BF atty for good measure
-
18 hours ago, Juvenile43 said:
Sweet thanks. Havent played the china waiting game since the early days of fasttech
No response from them, I pulled the trigger on a red one - we shall see
-
On 3/20/2018 at 10:57 AM, Modfreak said:
Hi, try SoftwareSP13 International Vers. shows like this:
Thanks from myself as well
-
Just re-looked at the page, and you are right. Must've been thinking about a different site. I sent them an email asking if it's in stock. I'll let ya know
-
They aren't bad, be prepared to wait on their pre-orders, they often have the lowest price, but I have very often seen that they do not get the first shipments - occasionally, I have canceled a pre-order with them to get it sent, for not much more, to me from a vendor in the states
-
Here's one with a 4 cell lipo that can feed the board the 400 watts max: https://www.madmodderstudios.com/store/p38/DNA_250c_2800mah_4s_lipo.html
-
1
-
-
Using the copper plug, I measured the internal resistance as 0.018, thought that was high, but the only other dna squonk mod I own is the DroneBF - that internal was 0.004 - but different 510 and different chip
-
Quote "The Calibration tool is a solid Copper, 510 threaded shorting tool, used to set the internal mod resistance. It looks at losses incurred by soldering, connections, etc. to at least give you more accurate atty readings, etc "
I have a milled copper plug that I use to set the internal mod resistance using the atomizer analyzer. I suspect your talking about something with circuitry though
-
Nick has advised sending it in, resistance jumping around is a known issue with lostvape dna75c mods.
What the heck is a 11USD Calibration Tool?
Early Firmware and EScribe Suite Discussion Thread
in EScribe, Software and Firmware
Posted
At this point, when I do a thermal calibration, the window that opens is very small, and will not maximize or enlarge. It's a bit of a PITA.
Using the latest intl update