shrahman
-
Posts
13 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by shrahman
-
-
Thank you, @retird
-
You'd most likely have to rewire the battery cradle as well, since the Paranormal 75C is running in parallel, whereas the 250C will need the batteries in series.
-
1
-
-
Is there an updated version available for macOS? I checked in the early software thread, and it only has SP12 available.
-
1 minute ago, thewarm said:
Why is there a "Current Profile" box above the Current Profile tabs? It seems redundant.
When you upload settings to device, the Profile chosen in the drop down menu is made the active profile on your device, @thewarm.
-
In device monitor, for the screen shot function, is it possible to get the values to be also shown the same way as a screen capture does? Both screens are from the same draw, first one is from eScribe and the second one is a screen can.
-
1 hour ago, Lowbytes said:
Here is another one.......... A report that was given in the GERMAN DNA75C group:
A 2 amps limited AC charger is not working in charging mode anymore
The same charger/cable was proper charging the cell via usb before the sp23 update - now it is starting to charge cell and reporting fully charged after a few seconds
Charging with a 500ma rated charger still working
I´ve ask user to downgrade and check to make sure that it is not hardware related - but he will stay on sp23!!!! So just for your information if you´ll have any other USB related problems reported!
Regards
Mikel
I've not had any issue using a 2A wall charger and USB with a Therion 75C
-
Vapedroid Theme by Ayman Azmy. I noticed the error when the mod was untethered. Haven't checked to see if the error is the same with the mod connected on USB.
-
Think this may be a new bug? While adjusting running wattage on the mod, the preheat wattage changes as well. I took a video, but file size restrictions don't allow me to upload
-
Thanks, dwaindablane. I'm assuming that since I'm using a DNA75 and not a DNA75c with eScribe 2.0, I should probably revert back to the older 1.2SP5a?
-
Have the "Soft Reboot" and "Hard Reboot" options from the previous eScribe versions been removed? I can't seem to find them anymore in eScribe 2.0
-
Would really appreciate if someone would be able to provide the CSV file for the discharge profile for the Turnigy nano-tech 1300mah 3S 25~50C Lipo Pack. Thank you!
250C software
in EScribe, Software and Firmware
Posted
That is the eScribe 2.0 SP13 beta which supports the 250C. I haven’t seen any further updates to this yet.