-
Posts
70 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Forums
Downloads
Posts posted by DNA Papst
-
-
Yes.All works fine
-
Ah, Ok.
-
Escribe starts in Mac OS Ventura Beta, but as soon as it is supposed to read data from a board, the program simply closes without any error messages
-
vor einer Stunde schrieb dwcraig1:
It might be best to contact James here, might not see it otherwise.
Thanks!
-
@James Many people from the German DNA Crew have taken their turn and translated as much into German as we could. The old German translation that is automatically installed with Escribe is already a bit older. Since you implemented a lot of new things in time, 60 percent was not translated. The new version of our translation looks completely different. We would be glad if this version would come automatically with the next Sp. (Like our obsolete version back then). Best regards from Germany Soulvape (Michael)
-
Nimm die Kurve, dann passt es perfekt Wire
-
vor 7 Stunden schrieb zz99:
I've just received a Lostvape Orion with DNA Go chip
Question is how do I get the Go chip recognised in Escribe. I've got version 15.1 installed but it doesn't recognise it
Anyone else with a DNA Go board ?
the escribe version with dna go board support are in the moment for evolv beta test people only.it works very good, but not many setting for the new dna go board.
-
have you test it in pk mode?
-
my paranormal 250c have 0,003 ohm.
Much measured!-
1
-
-
Gerade eben schrieb ShowerHead:
They're not TC wires, so they shouldn't do Replay.
it do,i vape and the wick dry, and the chip goes down wit the watt so no dry hit :-) look video
-
with your help, the error has not surfaced. Please never disable the pk mode . Only in Pk Mode Kanthal and ni80 work very goodin replay modus :-)
pk mode and kanthal in replay (vape until cotton dry) in german language
-
vor 18 Minuten schrieb James:
Hmm. Are all of your coils of very similar resistance? Maybe it thinks you are putting the same coil back on.
Thats right. And the it switch in tc Mode? And What is the pk Mode?
-
With the mod section go to the safety tab and change it from restrict to viable coil to allow dubious coils. That may help
-
I am finding the following error in the current firmware: If i unscrew my atomizer which had been running in replay mode, and screw on a new one then it seems to throw out a temp protect error below the replay menu. Only way to fix this issue I have found is to take out my batteries or change into another profil. This has happened 3 times so far. i use flat clapton ss316l with 0,14 ohm .
As far as EScribe goes what does the PK mode do and what exactly is it used for in Replay?
-
vor 41 Minuten schrieb mactavish:
Same here, James shared a link for SP13 in the “Mac EScribe Suite Beta Thread”, BUT for some reason NOT in the normal thread for new updates, still showing SP12. I ran SP13, but don’t see any REPLAY fields in Escribe. I only have a DNA75C, but that should not have any affect, correct? I’m using the MAC version.
you must wait for 75c firmware.i have the paranormal dna250c with replay, and i see in escribe no replay screen two.but it works,and i think the screen is on chip at the moment
-
1
-
-
vor 3 Stunden schrieb Juvenile43:
Where did u buy this?
its a pre sample
-
My Paranormal 250C
Great Mod and replay is so genius!
-
Here you can download it ;-) http://www.dna200.de/?page_id=67
-
1
-
-
Vapcige have posting: DNA250C. 2 battery to 200W. 3 battery to 300W. 4 battery to 400W. How do you think 2,3,4 batteries?
-
1
-
-
Am 13.11.2017 um 15:52 schrieb tramog:
Escribe theme designer.
Preheat: How is it possible to choose between Punch or Temperature? Is not there an option to do this?
The Board do it automatic, punsch is for non tc, and temperature for tc
-
Here now better pictures from the mod. and Mooch have an new statement about the problem:
WARNING: I recommend not using your HCigar VT75C...at all.
I posted earlier (now deleted) about HCigar's warning not to use 26650's that were "too long", i.e., ones they didn't bother to test the device with. I recommended only using shorter 26650's and mentioned a few that I measured as being shorter than most.
I've thought about it some more and have decided that I must recommend not using this device at all.
Using a 26650 that is "too long" can lead to a short-circuiting of the battery, possibly causing it to burst. This is an unacceptable design flaw followed by completely inadequate testing by HCigar. What kind of company doesn't try out a variety of 26650's when creating a 26650 mod?
Here's HCigar's statement regarding this problem: https://imgur.com/a/aK2q0
Some posts and a video about this problem, posted to my previous thread...
From Milen Cholaski: https://forum.evolvapor.com/topic/68961-vtc-75c-warning/
From Milen Cholaski: https://www.youtube.com/watch?v=CH2bVu_YUL0Not knowing what length any 26650 could be, and the possibly very serious consequences of this mod's defect, has led me to recommend not using this mod at all and speaking to HCigar about your options.
If you do decide to use it I strongly recommend only using 18650's, very carefully.
I realize that many of you have had no problems using 26650's in this device. But the risk remains and I must stand by my recommendation. Each person can make their own decision regarding this risk and I fully respect their decision.
-
From another german user, the + wire has a damage, can this make a short circuit when contact to the case?, and then the battery make boom?
-
Here a Video from the mod,......
-
Thats right. My English writing is not Good to write like you it done. Thanks
Linux EScribe Suite Beta Thread
in EScribe, Software and Firmware
Posted
https://downloads.evolvapor.com/SetupEScribe2_SP55_INT.run