The case analyzer was run at 75.2°
The mod resistance of my Finder is 0.007 ohms with the copper plug.
The two battery csv's are for VTC5a's and LG HD2's. The HD2's are the purple ones.
Enjoy,
JT
3x LG-HD-2 series.csv
3x VTC5a series.csv
I just got back from the hospital, I am fighting stage 4 kidney cancer. So sorry for the late reply.
Yes you can run my thermal settings. No none of my seven 75c/250c mods show any random charge current during the case analyzer test. If yours does it has a problem.
All boards / mods are different. If my settings do not track temperature properly on your mod you can raise the Case Static Temp Rise if it is high or lower it if it reads low until the temperature reads properly. Try 1° or