sgtmonty Posted July 31, 2015 Author Report Share Posted July 31, 2015 I was vaping at 420f and 50watts on a .1 build l, I took a pull maybe 3 seconds and when I went to take the next pull it didn't fire. I looked and the screen was off. I have tried plugging it in to PC and I get nothing. The battery was at about 40% . I opened the case and the fuses look fine, board looks fine. It was running for a couple days really great before it died. Any thoughts? Link to comment Share on other sites More sharing options...
Jcca1973 Posted August 1, 2015 Report Share Posted August 1, 2015 Was exactly the same that occurred to me Link to comment Share on other sites More sharing options...
John Posted August 1, 2015 Report Share Posted August 1, 2015 Were these DIY mods or commercial ones? Anything else for us to go on? Obviously we'd like to cross ship replacements so we can get yours back to see what happened, if you could contact the main Evolv help desk and set up a cross ship, that would be ideal. Link to comment Share on other sites More sharing options...
Jcca1973 Posted August 1, 2015 Report Share Posted August 1, 2015 I already send mine to evolv just couriose what's the problem. And how many one can be affected? Link to comment Share on other sites More sharing options...
sgtmonty Posted August 1, 2015 Author Report Share Posted August 1, 2015 It was a diy mod. It was working flawlessly for a couple days. And then it just stopped. I will contact the helpdesk, I was just hoping that maybe someone had an idea as to what could cause this. I know its difficult to diagnose without having it on hand though. Link to comment Share on other sites More sharing options...
John Posted August 2, 2015 Report Share Posted August 2, 2015 Do you remember if it stopped mid-puff or if it just didn't wake up from being left alone? Link to comment Share on other sites More sharing options...
sgtmonty Posted August 2, 2015 Author Report Share Posted August 2, 2015 It was idle and when I went to use it it didn't work. Link to comment Share on other sites More sharing options...
sgtmonty Posted August 2, 2015 Author Report Share Posted August 2, 2015 Additionally, It had a firmware update a couple days ago. I don't remember the build date, but it was purchased through protovapor about 2 weeks ago. It was working so beautifully, I miss the Vale. It was the most consistent I have experienced since 2008 when I started. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now