My board just died

[sgtmonty]

I was vaping at 420f and 50watts on a .1 build l, I took a pull maybe 3 seconds and when I went to take the next pull it didn't fire. I looked and the screen was off. I have tried plugging it in to PC and I get nothing. The battery was at about 40% . I opened the case and the fuses look fine, board looks fine. It was running for a couple days really great before it died. Any thoughts?

[Jcca1973]

Was exactly the same that occurred to me

[John]

Were these DIY mods or commercial ones? 

Anything else for us to go on? Obviously we'd like to cross ship replacements so we can get yours back to see what happened, if you could contact the main Evolv help desk and set up a cross ship, that would be ideal. 

[Jcca1973]

I already send mine to evolv just couriose what's the problem. And how many one can be affected?

[sgtmonty]

It was a diy mod. It was working flawlessly for a couple days. And then it just stopped. I will contact the helpdesk, I was just hoping that maybe someone had an idea as to what could cause this. I know its difficult to diagnose without having it on hand though.

[John]

Do you remember if it stopped mid-puff or if it just didn't wake up from being left alone?

[sgtmonty]

It was idle and when I went to use it it didn't work.

[sgtmonty]

Additionally, It had a firmware update a couple days ago. I don't remember the build date, but it was purchased through protovapor about 2 weeks ago. It was working so beautifully, I miss the Vale. It was the most consistent I have experienced since 2008 when I started.