EagleRock

My San is now sorted. The new device has more screws on the top plate so they must have modified the original design.

Just to give an update to everyone. We are now waiting a new top plate and battery cog from Vaperz cloud as they said those are the issue after their research.

In the pics i posted yesterday i was using the shift tank with a GTX coil but it also happened previously when using an RBA with an Alien coil.

Battery was around 4.13 and it dropped to 3.35. That is still a big drop no?

Ill try again with a full battery and see. Still the ones i used was around 70% full. nothing was lose, i just snugged everything.

Mix between Molicell P28A, Molicell p30B and Murata VTC5A. similar results from all.

Havnt noticed much battery drain when not using, also I have never had liquid down there so far, I keep an eye on it often as you need to change the batteries all the time :D

So I opened the mod from the panel side and was able to access and tighten all the screws; seems to have helped a bit with getting more juice out of the battery, as the puff count is now around 150. but I'm still getting these weird spikes nd voltage drops when I vape on it, what do you think ?

Ill take tighten those screws today and test with a new battery.

Was it also the San? Does this mean that we have some defect in our units?

Changed the wattage to 45W for better flavour, here is with 30W.

Fresh battery with more vertical lines while vaping

Yep, not firing. Was thinking that it looks weird too

My battery was half full when i did this. As mentioned it is 3 weeks old molicel p30b bought from a reputable local shop. The wheel on the negative terminal is tight.

Another while im vaping.