-
Posts
16 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Droid Kung
-
-
2 horas atrás, James disse:
I don't understand. What is "Recorded Puff Number" and how are you putting it in a screenshot? Is what you are saying that the puff count in Device Monitor is different from the puff count on the device screen?
Yes, that's what I'm saying.in the device I'm using the setting recordings-puff count (recorded puff count) and that one gives me the real number, the setting-statistics total puff count got stuck a long time ago, until yesterday.
Yesterday I did some checks.
"I did a couple of checks and it as to do with the setting I'm using.
So in the first image I posted yesterday, the setting I was using, was (Recorded Puff Number), and that setting until now worked like this, I could see the total puff count on the Mod but in the device monitor was stuck at 74193.
I decided to check the available settings, and I changed from (Recorded Puff Number) to (Statistics Total Puff Count) (Pic_1) and it started to update immediately on the Mod, and at the device monitor, but from 74193 puffs not from 408884.
I went back and changed the setting to (Recorded Puff Number)again, and in the Mod keeps showing me the correct number that now is 409232, and the device monitor started to update, but from 74193 that is now 74545 (Pic_2)."
And today come to find out that at the normal statistics, (the ones you can reset) at the device monitor the replayed puffs doesn't reset also.
-
Back, ok, I did a couple of checks and it as to do with the setting I'm using.
So in the first image I posted yesterday, the setting I was using, was (Recorded Puff Number), and that setting until now worked like this, I could see the total puff count on the Mod but in the device monitor was stuck at 74193.
I decided to check the available settings, and I changed from (Recorded Puff Number) to (Statistics Total Puff Count) (Pic_1) and it started to update immediately on the Mod, and at the device monitor, but from 74193 puffs not from 408884.
I went back and changed the setting to (Recorded Puff Number)again, and in the Mod keeps showing me the correct number that now is 409232, and the device monitor started to update, but from 74193 that is now 74545 (Pic_2).
Does anyone know how can I keep both updating and with the real count?
-
Hello James yes, the puff count at the device monitor, in the "normal stats" works fine, only the total stats puff count is stuck.
it's a 250C. -
4 horas atrás, Fernando Patricio disse:
Max USB Charge Rate: 1.5A
I have one more question Dragan, where do we set this config?
And yet if you have time, I would like to discuss with you, the output values, because I vape at so low wattage that the default values look to me way too high
-
Hello first I want to say that I'm not sure If I'm asking on the right forum, any way if I'm wrong Admins, please move or delete.
Ok so my device monitor stopped to update my total puff count, I guess two years ago or even more, I really don't know, I've tried to reset statistics a couple of times during this period, and never worked, today I did again, and the result was the same.
The total energy is updated
The total time is updated
The total puff's stopped at, 74193 and the Mod right now has 408884.
Escribe it's always updated, and I did tried in different computers during this long period of time since I noticed it.This is not a bid deal I know, and since I have the correct statistics on the Mod, I'm probably being preachy I understand that, but I'm curious why something like this is happening, and can it be fixed?
-
25 minutos atrás, Dragan Čelebić disse:
Hello Patricio Fernando ..mainly protect the battery cells and contribute to the preservation of the board (my view)
Thank you Dragan, I will adopt your settings, well I will decrease them even more to 25, 15 because I only vape at 42W, and the tendency is to decrease the power even more once I finally get my hands on a fused Clapton 2x32 + 38 ss316.
-
Em 23/08/2021 em 22:55, Dragan Čelebić disse:
I will try to help with the requests.
My settings for Molicel P42 are as follows:
Cell Soft Cutoff: 2.9V
Max Peak Input Current: 28A (1 s)
Max Sustained Input Current: 18A
Max USB Charge Rate: 1.5A
Attachment, my Molicel P42A Profile.
Thanks
Hello Dragan I'm sorry to resurrect your answer 1 year later, but the:
Max Peak Input Current: 28A (1 s)
Max Sustained Input Current: 18A
caught my attention I wonder why did you decrease them from the default values, please have in mind that my electronic knowledge is low.
Are Those meant to protect the board or the battery?
Thank you in advance, hope to listen from you soon.
-
-
Yes, I did it an hour ago, and now it's working, I tested before posting a reply.
you have to do it in Fahrenheit, and then the interface will convert them to Celsius, mystery solved , thank you very much, I believe I finally have my theme finished, not a fancy theme, but it has everything in hand, unfortunately I can't do the fading active time config on the mod, but well, maybe in future.
thank you CMK for your help
-
Back it didn't work, I have no explanation for this, I've tried many, many aproxes and never works I end up always with RED for all temps.
Does anyone have any idea of what I'm doing wrong, this time I even performed hard reset, back to the default theme, and configs, and nothing.
-
Thank you CMK, I will give it a try, I know 50 is not a problem but I chain vape, I never got even closer to 50, my max was 47, but I've seen so many people complaining about toasting their screen's I don't want to even try it, any way I vape at 42w dual coil with 32*2+38 at 2,5 mm, and I have a great vape, my main focus is to keep my vape and improve even more the efficiency, I'm kinda addicted to efficiency that's all.Thank once again
-
hello im having a difficult time creating conditions on my main screen, for the board temp and room temp, ive done in the past several time and never had a problem, but this time im having a bad time with this.
what i want to do is so so simple that im even achamed of asking for help.
so I want the board temp to show below 40 celcius GREEN above 40 and below 45 YELLow and finaly above 45 RED I know this is very simple to do but is not working for me, i dont know why, and ive tried several aproxes but im unable to find where Im failing, can any one one give me an hand on this ?
thank you
-
ok wayneo thank you
-
1 hora atrás, Wayneo disse:
No to all your questions. But there are 3 stealth levels.
Thank you Wayneo.
Yes I know, and I do use the full stealth mode regularly, in fact , I will take the opportunity if you don't mind to answer yet another question, I believe I already know the Answer but hey it doesn't hurt to ask.
What about Battery loaded profiles? Is it possible to change them in the mod? You know I have 40T´s P42a´s etc. and I do have the profiles loaded , but without the ability to interchange them on the mod I end up sticking to the 40T´S
any hope ?
What about sugestions to the dev team is it possible? im a noob sorry for my questions I just arrived.
-
Hello there guys and girls ive been struggling to find how to create a setting on my theme, so I can edit on the mod the (fading active time), has anyone done this in the past? Is it even possible? Is there any available theme with it?.
I really don't want to waste your time with my stuff, if you know a theme with it, just let me know please, so I can redo it on mine.
Thank you in advance
Device Monitor Stoped to Update Total Puff´s
in EScribe, Software and Firmware
Posted
I just performed another reset, check the replayed puffs please, And in the total stats the puff counter shows 75171 and the real number is 409861, but the total energy and the total time are correct.