BlackFireDragon

Yep battery come unplugged. If you plug both connectors and still have issue like someone write in this thread battery have dead one of cells and must be replace.

Thanks for the replay. I solve this problem couple of weeks ago In my case the problem was dirt and eliquid that go inside the mod and gunk pin and cables. Employee of my cousin clean everything inside and mode works perfect. I hope this will help others who will have simullar issue.

Yes I try to diffrent one dual coil and second single coil both on both is the same problem. Atomizer from plus work perfect on two diffent box mods. Hmmstrange thing is I use this box mod for almost a year without any issues. With this atomizer around 5 months and with this coils two months without issues. I wake up take mod to vape and this start to happend.

For some time have strange issue with my Hadron Plus DNA250C box. When fist time pressing fire button after some time (around 30 minutes or longer) it read new coils and the coils are read almost double they are example if build have 0.12 it as 02 or 0,24ohm and give when confirm it/messure new coils and confirm it "temp protect". Work around I found is removing the battery/s for 3 seconds then putting it back box in this moment find new coils but trhis time with correct messurement 0.12ohm, I give the box to my friend emploee that alecricaltocheack if device have faulty cable, pin or sottering but there is nothing ;/ everything seems fine. Atomizer work fine on other 250C box and 100C box the same if twoothers atomizers connected to hadron plus box. For sure this is releted to box.I I alredy try factory reset and dont help.

Just installed the ver, 47 It's dark and better to work eyes will dont hurt like on white background. Thanks. When the full ver. of SP 47 come out it will replace the beta or must install ot manual ?

Sound great but I'm in the Eu so if I install the US version of escribe there will be no cut on power ? Becose if remeber it correct on US there is some strange law that you czant use 100W. I ask beose if make any change and sve it it will change the maximal WW ?

Yes escribe windows app. thanks for the info i will write the ticket.

I use DNA in multiple device for around a year. I want first to give a background to cover why this is important to me and people in the same spot. For around 9 years i have multiple surgery on both eyes, i will dont be specific becose it is hard to describe surgery and what was done but in short i have implants. Also first i have laser therapy. Now iI'm using strong pressure drop mediceaments. Why wriye tjos becose ? It's very simple bright colors like white, blue, yellow and every other like these couse after 4/5 minutes of watching constant bright color high pressure rise on eyes and must take medicament to drop it but configure the mod in app dont take few minutes but a lot longer so this is really a paint to make changes. This is why write this thered to ask and hope development team of DNA will consider this not becose of it's cool or someone have have this thout but from the health stand point of person like me who want to use the mod in full way and dont worry about pain. imple black or dark greay background with white letters will be amazing.

After the firmware update on Hadron Plus the performance drop a lot. I use Steam Creave Aromamizer Plus v2 with two coils Alien 5 wraps Ni80 0.3 that gives 0.15 build on 80W. Before the update the hit on coils was very noticable and after for some strange reason battery change to lipo 2 cells and the performance drop at lest half. I was thinking mayby this would help to fix it.

Mod is Hadron Plus Dual 21700 (batteries installed are Molicel P42A). This is from the website that test batteries: [quote] The datasheet for the P42A lists 45A as the max continuous c urrent rating but notes that cycle life is reduced at high current levels.[/quote] Like you can see on the picture in previous post the 100c Hadron mini use 40A peak and sustein 35A on signal battery mod. On Hadron Plus dual 21700 batteries mod cant change the values from 32A max peak and 30A sustein. The question is why cant do it ? becose of limit of the 250C board or mayby something else and why 100C can use the 40A and 35A without any issue. For sure this is not the issue of the batteries used.

@dwcraig1 The new values in max peak input current and nax susteined input current for strange reason change the new values back to old from the picture when hit enter or mouse click on window. Any idea how to save changes ?

From what happend to me and wjat you write pretty sure it is a firmware bug/issue. Qestion for 1mln dollars what next ?

@CMK aka gwyar Thnanks will give it a try and see

Ok thanks. I will try to change just the amp. and see if the change will be visible in performance.

Thanks for the replay. So the amp should be set as the on the hadron mini but what with "cell soft cutoff" from the picture is on the 2,75V dont get it. This is for one cell or two cells setting ?