e.spark
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by e.spark
-
-
I guess I didn't clear things up properly. I install this coil (the resistance of the wire is 0.26 ohms at room temperature), i vape it for a few days and when they get gunked up, i dry fire the coils to clean them up. After cleaning it up using the method I mentioned earlier, I give the coil 20 minutes to cool off and then when I check the resistance, I see that the ohm has increased ( 0.27 ohms at room temperature). Every time I clean the coils this keeps on happening. Now my coil has a resistance of 0.31 ohms at room temperature. I hope this will clear things up.
Now the question is whatever is going on with this coil, is it good or something to be concerned about?
Sorry for my bad English though ☹️
-
Hello!
I have been vaping using ss316l wire for a month and whenever I dry burn and rewick the cold ohms starts changing. When I first installed the coil it was around 0.26 ohms and after dry burning it after 10-12 times it's around 0.31 ohms. I usually dry burn at 15-25 watts with 1-2 seconds pulses. Is this something I should be concerned about? Thank you!
Ss316l cold ohms changing after dry burning coil?
in General Discussion
Posted
In my case the resistance increased by 0.5 ohms. I cleaned the 510 threading and checked if there's anything loose in my atty. I couldn't find anything wrong with the mod or the atty. I even checked the atty in another DNA mod so yeah I'm confused