vape vape
-
Posts
21 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by vape vape
-
-
It is not recognised when the battery is removed and tried.
Other dna60 devices are recognised, but only one is not.
Is there a chip fault?
-
I bought a dna60 device.
When I connect it to the escribe, it charges but does not recognise the device.
I use the cable for transfer.
Trouble.
-
I would like to reproduce it on my device but can't.
-
7 hours ago, Wayneo said:
オームがロックされているコイルがあり、それをオームロック%値とは異なるコイルと交換した場合。Mod-> escribeの安全タブ
What do you mean?
A little more detail would be helpful.
-
-
This is DNA 60. I get this screen and the wattage keeps dropping and I can't operate it.😭
-
-
On 5/28/2021 at 8:07 PM, Wayneo said:
How much is a little?
Stabilizes at the higher value, or the lower value?
Post a screenshot like above while firing, showing that behavior
0.03 resistance drop and stabilizes at the low end Sorry it took me so long to get back to you, thanks.
-
0.03 resistance drop and stabilizes at the low end Sorry it took me so long to get back to you, thanks.
-
This is the mod screen.
-
This is the case for all coils. But it doesn't happen with anything other than the billet box.
-
Hello! Thank you for yesterday!
Dry Fire is running properly. The other mods are stable, but only the billet box has a slight drop in resistance on the first firing.
-
For some reason, when I press the button to heat it up, the resistance drops a little. Normally the resistance should go up when heated, right? After it goes down, it stabilizes, but why does the resistance go down a little only at the first heating? I'm using Kanthal wire.
And I use it in orthodox power mode.
-
I'm looking!
The billet box is 0.07Ω more expensive than other DNA mods when built with Kanthal.😭
-
Thank you! Does your billet box also have a jump in resistance?
-
Thank you very much!
The resistance of the billet box adapter is high.
Is it dangerous to roughly adjust 0.02 with that in mind?
-
I'm sorry. I don't understand. What is this mod resistance item for?
-
OAM reader 0.7Ω
Other 3 DNA boards mod 0.72Ω
Billet box 0.79Ω -
My billet box shows a higher resistance than other DNAmods. For example, other DNAmods have a resistance of 0.7Ω. With the billet box, the resistance is 0.77Ω, which is 0.07Ω higher. I want to compensate for this 0.07. I only use power mode.
-
For the mod resistance field in escriae, do I just enter the number after subtracting the internal resistance of the mod?
What are the settings here?
Device not recognised.
in General Discussion
Posted
Micro usb.