[what wire works best in temp control with dna 75c?]

4 hours ago, gwyar said:

Bei den genannten / verwendeten Materialien (SS316 etc.) handelt es sich um Legierungen verschiedener Metalle, deren Spezifikationen jedoch leichte Toleranzen in der Zusammensetzung zulassen. Mit diesen leichten Toleranzen variieren jedoch auch die thermischen Eigenschaften. Wenn wir also als Beispiel bei SS316 bleiben, so ist im Chipsatz eine Kurve hinterlegt, welche die Widerstandsänderungen in Abhängigkeit zur Temperatur beschreibt (=> Referenz). Anhand dieser Kurve und einer steten Messung des aktuellen Widerstands der Coil "erkennt" der Chipsatz die Temperatur der Coil. Wenn aber das verwendete Material in seiner Zusammensetzu ng ein anderes thermisches Verhalten hat, welches nicht mit der hinterlegten Kurve übereinstimmt, kann der Chipsatz nicht die korrekte Temperatur "erkennen". 

Danke 

[what wire works best in temp control with dna 75c?]

On 5/26/2021 at 12:56 AM, dwcraig1 said:

Here are some situations that wreck havoc on getting TC to work properly especially when using wire that has little resistance change when heated. Things need to be pretty much perfect for these wires to be read properly by the board.

!st.  is a coil with shorting wraps giving a false cold ohm reading, as the coil starts to heat the shorting may stop creating a jump in resistance.

2nd.A bad connection between the 510's, maybe atty's 510 is too short or has dirty threads on it's 510 threads or loose to wire post.

3rd. Wire not clamped under post screws tightly.

4th. Wrong TCR settings.

There has been some cases where LV put thread locker on the 510 threads where the ground wire connect internally on the 510 socket creating a problem with resistance readings. This was quite some time ago and I have not heard of it since.

Just to name a few, I'm sure there's more

Lol after reading this I’m wondering if you’re the same person who wrote about some of this on the e-cigarette forums that I just recently read. 

On 5/26/2021 at 3:42 PM, zark said:

 

 

 

4. Химический состав проволоки отличается от эталонного значения, следовально TCR не соответствует, загуженному.

 

 

 

 

 

 

 

Спасибо за эту информацию. Вы можете объяснить это поподробнее? Я не совсем понимаю 4.

[what wire works best in temp control with dna 75c?]

On 5/25/2021 at 11:11 PM, leea12345 said:

Just google ss316l dna temp control issues , you will find some really good posts to read, but no it is not only dna 75c issue it is on other modes as well as far as i can see , it seems to be to do with the resistance change in 316l ,can make it a bit rubbish now and again in tc mode . I will report back when i have got my ss430 and wrapped a coil, the profile file installed and had a vape . I am expecting it to be very much improved tc experience due to the different resistance changes , after getting some good advice from people on here

If it is all good, then will not even bother with 316l again .

 

I hear ya. I’m looking forward to hearing how that works for you. I’ve looked around these forums and didn’t find a whole lot of posts about this but I did find out more about this topic when I got to googling. 

Was reading about an unstable 510 connection (damaged, dirty, etc) and the initial reading of the base resistance that could cause issues. And then of course you already know about complex coils not always working  in TC as expected. Then I read something about case thermals and internal resistance (which I admittedly am ignorant of) causing issues.

So then I thought that it does make sense that there may be some issues specific to certain mods as opposed to others due to build quality, QC issues, and other physical parameters even if the different mods have the same DNA boards with the exact same firmware, same software config, same hardware used (coils, attys, batteries).

Reading about a guy who’s apparently had zero issues with TC for years. Uses SS430 single wire. So I wouldn’t be surprised if that does it for you. 

I guess should’ve done more research than just going on all the overwhelmingly positive comments about the DNA chip’s TC, but I came across a barely used squonk that’s popular and was just listed fs on a Facebook group and figured the worst case scenario is I wind up with a super customizable mod that didn’t break the bank.

What about replay? How has your experience been with that?

[what wire works best in temp control with dna 75c?]

23 hours ago, Wayneo said:

No worries @SquonkerMoniker, when you said this

Some users have not done many of those bolded items. 👍

Ahh I see. For a while I didn’t really even consider buying a mod with a DNA chip. Then I decided I wanted something that can do awesome and reliable TC. So here I am. I didn’t really do any research on it specifically. I just always see comments praising the DNA chip. Never saw a negative or even slightly critical post regarding the TC. 

18 hours ago, leea12345 said:

 yes but i think its a 316l issue not dna device , also this is my second device in dna 75c , and it is exactly the same for me with ss316l, When it works good it is awesome , but too much playing about with it for me and i do think other materials will work better  . I am no expert but can only report what i have found from my experience . And tried many coil builds, spaced , different escribe settings you name it tried it . I just do not have a lot of luck with ss316l 

Yeah I’d absolutely love to know what’s causing your problem. 

18 hours ago, leea12345 said:

just do your own research, there are many threads about it, i can only report what i have found over a period of time . When it works with ss316l it is awesome , just not consistent enough for me, so am trying ss340 as it will be more stable in tc mode i think thats all ..

When you say there are many threads about it, are you talking DNA chips in general or specific to the 75c? 

[what wire works best in temp control with dna 75c?]

5 hours ago, Wayneo said:

Welcome @SquonkerMoniker 👋
Some users such as yourself are more informed than others.

The datasheet for the 75C is here: https://downloads.evolvapor.com/dna75color.pdf
The 'fire' button is usually the big one. The 3 in a row, well the top 1 is for moving up. The bottom 1 is for moving down. The middle is the select button.
The 'something' can be found using the search field there ↗️

Theme specific questions/comments are usually handled by the creators themselves
 

Thank you! Genuinely curious, what makes you say that I’m more informed than other users? Not trying to be rude at all just wondering. 

[what wire works best in temp control with dna 75c?]

8 hours ago, leea12345 said:

you are very kind, thank you for your time, now just got to find some in the uk to buy, does not seem a lot about , also just wish i could have got 316l working ok , spent more time playing about than vaping it , Thank you. 

Have you found others to have the same problem you’re experiencing?

[what wire works best in temp control with dna 75c?]

8 hours ago, leea12345 said:

Hi there have tried ss316l , so many profiles, coils, settings and all that, sometimes it works, sometimes not , just seem to run into so many issues , just seems a little bit everything needs to be perfect with ss for me . So use it in replay and happy , so am looking for the best tc wire type  for dna75c , Is there a wire type that works more reliable in tc mode , for a noob like me

thank you

I just got my first DNA mod (75C also) just because of the “best” “most accurate” “reliable” etc etc comments from everyone on forums, Reddit, reviews, damn everywhere. Never once even seen someone say their DNA mod isn’t reliable in TC. Just now decided to come here to join the forum and find a manual or button guide or something. Then I happen to see this first. Gotta be kidding me.

Someone tell me this isn’t common at all please. And 316l is by far the most common ss wire. Wtf is going on here. I can’t believe this is the first thread I see from the undisputed TC champs.