-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Pigsy
-
-
3 minutes ago, Podunk Steam said:
Your first post mentions Replay.
Yes i dowloaded the theme so i had replay if i wanted to use it but in the watts profile i use for n80 i disable replay, Sorry for the confusion will edit post.
-
46 minutes ago, Podunk Steam said:
Try using temperature sensing capable wire for your coils.
I don't have replay turned on in escribe for that profile !
-
34 minutes ago, dwcraig1 said:
It is not meant to fix anything just info.
Do this: Start Atomizer with no atty. Now start screwing in atty.
Note how many turns or partial turns from where Atomizer Analyzer starts reading ohms till it's screwed in all the way.
It goes in one full turn then starts reading ohms, reads 1.2 ohms and all the way in it reads 1.076
- 1
-
Ok i done the atomizer analyzer before firing it....
Ohms 1.067
Raw Ohms 1.071
Mod Resistance 0.004
Room Temp 67.41°F
When fired showed the check atomiser twice and now works fine, hope this helps.
-
Just now, Wayneo said:
Shouldn't matter with N80, but I'd do it before. Let us know if the ohms fluctuates, and how much. Did this always happen, since new?
I thought it best to do it before as thats when the problem is. Yes this has happened from day one, only had it 6 weeks. Thought it maybe the theme so changed it as i wasn't keen on it anyway.
-
9 hours ago, dwcraig1 said:
Try using Atomizer Analyzer in EScribe to see if atty has a connection or not and post findings.
Will do this when i get home from work, should i do this before i fire the mod ? Sorry don't know how to post findings but will have a look.
-
12 hours ago, Podunk Steam said:
Clearo atty? Coil material? Mod resistance set? Ohms read from a room temp mod and atty? Clean battery contacts?
The atty is a 24mm Dvarw The coil is a MTL clapton all ni80 (pc coils) Sorry how would i find room temp for mod & atty ?
Battery contacts are all clean.
-
I recently bought a Prisma DNA 75c, i have downloaded the Evlolv replay theme on to it. My problem is once it has locked i unlock it and everytime it shows check atomiser from 2 to 5 times then it will fire and be ok until it locks again.
I have checked the atty is tight and tried other atties aswell but still does the same thing, I downloaded another theme to check it wasnt that and i am now stumped.
Any help would be much appreciated please.
Check Atomiser
in General Discussion
Posted
Im not the best person to be able to explain a problem and should of put in more information, i have heard of a cold solder joint in the past, hoping its not that.
i have attached a picture ( hopefully it works) of the mod. Shame because its a great mod. Thank-you for your time 😊
C0291407-B97A-4676-AE09-C50C68A7D769.webp