[100 watts regardless of settings]

The owner of the company made it right. I am getting another PSU. He was out of town on vacation and from my understanding a single man business so there was a little delay.  I am happy with analgboxmods wonderful customer service.

[100 watts regardless of settings]

8 minutes ago, retird said:

Surely they will guide you to a  PSU that will make the  250C  hum................

I hope so they made the PSU...

[100 watts regardless of settings]

Measured voltage at the PSU at 9.3v and the manufacturer is saying it should be 12v so  I am waiting on them to see how we are going to move forward. 

[100 watts regardless of settings]

I sent them an email. Thanks for the help. Ill update after I get an answer.

[100 watts regardless of settings]

Yeah but you would think a pass through would go higher than 100 watts lol

 

ill contact analog box mods they are good people.

[100 watts regardless of settings]

Here is set at 120watts ...get 99 watts

[100 watts regardless of settings]

while firing

[100 watts regardless of settings]

But even at 9.375v shouldn't I be able to get more wattage out of it?

[100 watts regardless of settings]

output states 12v on label...

Not set up to actually test it

[100 watts regardless of settings]

take a hit at 120 watts...puff info show 97.8 watts...wont go higher. .

.16 ohm dual framed staple Ni80

[100 watts regardless of settings]

nope its set to power supply 12v

[100 watts regardless of settings]

That might be the problem its set to 9 volts and the power supply is 12v

let me try it

[100 watts regardless of settings]

[100 watts regardless of settings]

22 minutes ago, retird said:

Here is the Datasheet for the 250C.  It has graphs that show max output power per coils ohm's and wire materials.  May be helpful.

https://downloads.evolvapor.com/dna250color.pdf

 

 

Thank you. Those graphs are exactly why I posted this question because I am not getting anywhere near that kind of power on .1-.2 ohm builds of any material (I normally use a .15 Ni80 dual build)

[100 watts regardless of settings]

42 minutes ago, Wayneo said:

From within Escribe ....... Can you post a 'Device Monitor' and a Mod - Safety tab printscreen
And which vapestation are you using and who built it

I'll post it when I get home this afternoon.

 

Analog box mod station and mod (built by them did not get the DIY kit)

 

http://analogboxmods.ca/Custom-Built-Box-Mods

The Xbox power box option on the work station  and a previously offered 250c chip in the mod (they are no longer offering it for some reason)

 

[100 watts regardless of settings]

Let me clarify (Because I figured it went without saying and I was wrong) this mod uses a DNA250c board/chipset.

 

[100 watts regardless of settings]

Using a passthrough mod by analog box mods.

Even if I set the wattage to 200 in wattage mode it never goes higher than 100 watts (usually it caps out at 98.9 watts)

 

have settings at 220 watt  max with a 12v input power source.

regardless of tank/rta I use and regardless of .ohms  it wont go higher.