I use temp control. Built on a Digiflavor Mesh Pro RDA, SS 316L mesh wire.
I am getting weak hits on TC, wattage, replay. All modes have the same issue. I don’t know how to fix this
If you using TC, you need check a resistance of the coil in cold temperature (room temperature). TC is working on the principle that the resistance of the coil changed with the warming the coil and so calculate right voltage/wattage.
So, first, measure the coil resistance while it cold. This is the important point. Start your puff from 200F and up it by 5 degree up your best puff. Make sure that you don't overcome 250F.
Help With DNA 250c Juice Detection?
in General Discussion
Posted
If you using TC, you need check a resistance of the coil in cold temperature (room temperature). TC is working on the principle that the resistance of the coil changed with the warming the coil and so calculate right voltage/wattage.
So, first, measure the coil resistance while it cold. This is the important point. Start your puff from 200F and up it by 5 degree up your best puff. Make sure that you don't overcome 250F.
Do you receive any error on the screen?