Matteo Galdi
-
Posts
7 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Downloads
Posts posted by Matteo Galdi
-
-
Il 15/8/2019 in 17:27 , dwcraig1 ha scritto:
Try the material file.
There is no change, are you sure it's stainless steel? That is how Kanthal or Nichrome would look.
Try the .csv that I'm including and post results again.
Ti ringtazio per avermi mandato il materiale DNA200 SS316L , lo inserito in escraibe e nella box ma il risultato era sempre lo stesso. Allora ho fatto un'altra prova , ho cambiato atomizzatore ho rigenerato un spped revolution (non la versione 2019) ho posto più attenzione nella rigenerazione . Ho fatto 6 spire (non 7) di SS316L diametro 2 mm della UD ho fatto una spira in meno per distanziare di più le spire e ho posto attenzione che non si toccassero. Poi non so se ho fatto bene ho fatto un paio di accensione delle spire prechè secondo me si stabilizzano gli ohm . Ha subito funzionato e dopo varie prove con il monitor di escraibe l'ho settato con tredici watt e ho posto il limite a 250 gradi C senza preriscaldamento. Nei prossimi giorni rigenererò una altra volta Strike 18 con la stessa rigenerazione se vuoi ti farò sapere. Mi piacerebbe un tuo commento a quanto scritto sopra se ho sbagliato qualcosa. Ciao ringrazio tutti e a te dwcaig1
- 1
-
19 minuti fa, dwcraig1 ha scritto:
Here I am using Device Monitor in EScribe. The cold ohms and live ohms are what I'm most interested in seeing. Note there is a change in resistance from cold to hot around 18% or so.
If you are getting a similar change in resistance and still jumping from TC to wattage then there could be a couple reasons.
1. TCR value in not correct for the wire material.
2. Bad connection between the board and coil.
Post a screen shot like mine, this was done with Windows Snipping Tool.
-
11 ore fa, dwcraig1 ha scritto:
Sorry but I'm not understanding your problem. Is it that your mod is switching from temperature mode to wattage mode as soon as you press the fire button?
Or is it some thing else?
Originally I thought it was because you had "Temperature-Dominant box checked but decided I was probably mistaken so I the deleted my earlier post.
I'm including pictures of "Temperature-Dominant both on and off.
yes my box switches from temparatura mode to mode eptenza as soon as I press the fire button
yes among the settings I selected dominant temperature but what happens is not normal
the screen of my box is like the second image, as soon as I press the boffone fire the writing with the degrees of temperature disappears and appears off
I will send you a video as soon as possible
thanks for the goodbye ciao matteo
-
14 ore fa, retird ha scritto:
Try using the SS316 material.
yes ss316L ud 28ga 7 turns coil 2mm diameter kendo batting
-
BE ON THE MOD THAT ESCRAIBE DOES NOT DETECT THE TEMPERATURE
-
DNA 75 ho creato un profilo come da allegato , sullo schermo appare off come se la box disabilita il controllo temperatura .
in monitoraggio non legge la temperatura.
Mi potete dire quale é il problema? Grazie
DNA 75 I created a profile as per attachment, on the screen appears off as if the box disables the temperature control. in monitoring it does not read the temperature. Can you tell me what the problem is? Thank you
controllo temperatura 316L DNA 75
in General Discussion
Posted
si