fesha
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by fesha
-
-
I put the ohms in escribe (Box mod-Electrical-Mod resistance) on 0.02 and got the same issue. Replay works furthermore only when i manually adjust 0.02 ohms down.
I set to factory settings, on 0.004 ohms an got the same issue. -
vor 2 Stunden schrieb zark:
But you talked about 0.02 ohms, and corrected to 0.004. Besides, I think that you need to increase the resistance of the mod in esbribe. By the fact that how many Ohms you increase the resistance of a mode, the coil resistance will decrease by the same amount of Ohms
It was previously (in factory setting) set to 0.004 ohms.
I have now increased it to 0.02 and will test it and report the result. Thank you! -
vor 11 Stunden schrieb zark:
Changing the resistance manually is the right way to achieve a good result, because the real parameters of the materials do not always correspond to the values accepted by the evolv. But if you always use the same resistance correction value, then it makes sense to change the resistance of the box mod in escrib ( Box mod-Electrical-Mod resistance )
It was set to 0.004 ohms. I set it to 0 ohms. I report if it worked. Thank you!
-
1
-
-
On my Lost Vape Triade 250c i only have replay if i manually adjust the resistance by at least 0.02 ohms down. Does anyone know the problem or the solution? Thanks
Replay only when ressistence adjust manually down
in General Discussion
Posted
Hello zark,
thank you for the help.
Here ist the settings file from my mod.
I hope we will find a solution for this issue.
Have a nice day!
For info: i always adjust the ohms manually directly on the mod.
Triade_250c_Fesha.ecig