-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by alvarotorijano
-
-
En 15/12/2017 at 3:58 , alvarotorijano dijo:
Yes I change one parameter, then I upload. No result. If change it on the running screen works well...
What to do? Im driving crazy
En 11/1/2018 at 20:00 , James dijo:@alvarotorijano, what device? Does it offer you a new firmware?
Suddenly, after a few time it started working.
I supose sometimes changes aren't loaded until the device restarts. Solved. Thanks guys, and thanks to the evolve staff who write me
-
Hace 31 minutos , Wayneo dijo:
Go to 1 of your 8 profiles. Click Load. Choose the one you just saved.
Thanks! How can I change the material on the temperature sensing mode?
-
how do you load the ecig profile file?
-
Yes I change one parameter, then I upload. No result. If change it on the running screen works well...
What to do? Im driving crazy
-
Hace 3 horas, giz_60 dijo:
https://forum.evolvapor.com/topic/68713-plain-text-serial-commands/
There are 2 charging screens...one for Power Mode & one for Temp Control...make sure what mode you are in and that you are seeing the correct screen...
Thanks a lot for the help.
I'm a trying to cahnge both of them, but no changes succed. The only way is to change the operating screens, because those are what shows the screen in stead of the charge ones.
-
En 16/7/2015 at 6:18 , James dijo:
Here are the main control commands. Enjoy
Fire: F=#S
Set Power Setting: P=#W
Set Temperature Setting: T=#C or T=#F or T=?
Set Profile: M=# (1 to 8)
Get Power: P=GET
Get Power Setting: P=GET SP
Get Temperature: T=GET
Get Temperature Setting: T=GET SP
Get Voltage: V=GET
Get Current: I=GET
Get Profile: M=GET
Get Battery: B=GET
Get Battery Cell: B=GET CELL # (1 to 3)
The Device Monitor works by issuing serial commands, so really anything it can do can be commanded.Please could you send the full list of commands? I think my dna has a firmware error because it doesnt whows the chaging screen. What caan I do?
-
Hi there im trying to change the information showed on the charging screen but it seems the mod always show the running screen even when it is charging (cell appears with the lighting but the information does not changes).
Where is the problem
Second question, how can I upgrade/update the firmware and which is the latest one?
Third, where are the command list to use on the cli?
Screen freeze
in General Discussion
Posted
Hi, from a couple of days ago my screen gets freezed, it stops refreshing en the splashboot, the charging screen, the idle sceen or when it is working... Everywhere, no matter.
I've tried to update the firmware, to reset the stats and to soft and hard reboot the device. I've tried to remove the battery but it happens one and once again. Sometimes it works again but gets freezen again in a random screen.
Any body has the same issue or think in any other different thing to try?
Thanks in advance and best regards!