[Titanium coils]

Could I use titanium and ni200 together in one build?

[Running List of 3S LiPo Options]

And what should be done with the extra wires on the battery pack? All you need is the positive and negative right?

[Running List of 3S LiPo Options]

So what then would be the best quality lipo battery. I'm sure it's wrotten in another thread but there are a lot of differing opinions from what I've seen.. I've heard some good things about the venom batteries

[Running List of 3S LiPo Options]

VapingBad said:

C = capacity, so 50 x 2.2 = 110 A

The fire button only uses a little power so any normally open momentary switch should work, but it is easiest to use the on board one IMO.

You do need a good 510 mainly so it has a low and stable resistance for monitoring temperature rather than raw power.

I've found a slightly smaller battery I'm thinking of using it's a 100c 2000 mah 11.1v. Would it be a good idea to add in a fuse or resistor or mosfet or anything like that or does the chip already have most of that covered?

[Running List of 3S LiPo Options]

I've been looking at building a dna 200 box and I'm wondering what the "50c" on this venom lipo 2200mah means. Apperently it equals a lot of amps and I'm wondering if im going to need a stronger fire button and 510 connection that won't fail under high stress. Pardon the noobness, this will be my first box.. Just want to be sure everything will be safe..