millersd95
-
Posts
2 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Posts posted by millersd95
-
-
My DNA200 is having issues with Temperatue Control, with no regards to type of wire. I've tried a couple of different atomizers and disposable coil heads for a couple different tanks. I will either get no read out of temperature (as if I had attached a non-temperature sensing coil), or one that is incredibly off, such as firing at 0.1W and reading a temperature of 800F, while the coil is cold. The resistance reading also seems to be off. If I install a coil into one of my tanks that has a resistance of .12, I'm getting a reading of .30-.40 cold. Could this be a short/ground or something to the 510? Can I fix this myself, or do I need to get it worked on? Is it the board? The device works fine in normal Kanthal power mode. But I've had very little success with temperature control on the device. Is this something I can fix myself?
Lately, the device is not recognizing temperature-sensing wire at all. It seems to think everything is Kanthal.
Temperature Control not working at all.
in Report a Bug
Posted
Well, I talked to Nick with customer service at Evolv, and he's saying it sounds like a 510 issue. I'm going to contact Flawless, who made the box, and see what they say or can do to help.
Also, the mod resistance was already set to 0.