R2dTOO
-
Posts
5 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Posts posted by R2dTOO
-
-
VapingBad said:
I mean that you will get all most all the mAh above 3.5 V and probably 98-99% above 3 V so the Wh should match the battery, I could be wrong but that is the impression I got, they are quite different from IMRs. But if you are running very high wattage they will get rejected eariler.
It doesn't matter if I'm vaping at 150W or 45W, the mod always dies when the battery meters shows between 20% and 25%. So, obviously, I need to input something other than 14.43Wh in the capacity settings. -
OK. I guess I need to do the battery analyzer to find out exactly what I need to use in order to get an accurate battery meter. Can someone link to the resistors that they have used for the test (link where i can buy them).
-
lewisss said:
if that is the hcigar vt200 you are talking about, no it will not, that battery is 106mm long, the external measurement of the vt200 is about 95mm.
and it is an XT30 plug on the vt200 also
there is room inside the vt200 for a larger battery than the one that is in there. i am just not convinced it is A 1300MAH Battery supplied with it. the battery analyser on mine calculated a true 1000mah.
I agree that it is not a 1300mah battery. I have my settings in Escribe set for a 1300mah battery, but it dies with about 20% remaining. This is why I want to buy a different battery. -
I found this on the Hobby King site, and was wondering if it would fit.
http://www.hobbyking.com/hobbyking/store/__9456__Turnigy_1600mAh_3S_30C_Lipo_Pack.html
has anyone replaced the VT200 Battery?
in General Discussion
Posted
I just want an accurate meter, so that I know when I need to get near a charger...
The Protovapor DNA 200 that I had first (had to sell for reasons) went all the way down before I got the weak battery message.