CarolMc
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by CarolMc
-
-
James said:
VapenHippie, to set a custom (non-Nickel 200) material for a profile, it's Material->Custom, then click Load CSV to load in the CSV file SteamEngine makes for the DNA 200. Nickel 200 you don't need to do anything.
You could do one profile per material configuration, or one profile per atomizer. The latter is nice if you have particular wattages, temperature limits, etc. that you prefer for different atomizers.
To access it on the device, hold up and down for a few seconds to get the device into Power Lock mode. Then you can switch between profiles by pressing up or down twice, and Fire to select the new profile. This is nice because if you have specific settings you like for each atomizer, you never have to come out of Power Lock mode, and can change atomizers by just, up-up-fire, or whatnot.
Is it possible to load a CSV custom file (pre loaded to an escribe profile) say for Kanthal, prior to your build? Or do you have to build it first create your TCR then upload to escribe. Learning curve here. Thanks -
Following this topic...
-
VapingBad said:
Or generate them by running battery analyser.
Understood, thanks -
VapingBad, understood do you know where I get the .csv from? I prefer to have the meter show correct. Thank you- Cheers
-
I havent received my unit yet but I've been reading through all the posts here for information. Also reading the escribe manual and becoming familiar with all the modules. I didn't realise I needed to download the csv. for 18650's so thanks for the additional information, and will I find the csv file here on the forum for the 18650's? Lots to learn but I enjoy it.
-
Vaporholic,
Appreciate your help... -
Gm111 said:
It does support lion, just designed around lipo.. just use li polymer 3 cell for 3 18650 and put say 2500mah for Samsung 25r & 3.7v too get your watt hours
Thank you for the clarification, happy to hear. -
Feel free to correct me but my understanding is escribe does not support DNA200's that utilize 3 18650 batteries. Will there be firmware/software support at some point?
Lost vape Orion suddenly stopped working
in General Discussion
Posted
I've had 2 of them since late August and both have done the exact same thing. This last one I'm returning for an refund. I'll never pay that much for a pod system again- Evolv or not... I do love Evolv though!!