[dna 200 mod not charging or detected by escribe]

Thankfully I was able to return it just waiting for the refund now but that sucks bro hopefully they can help you out but I agree with you these mod makers should have all chips tested and ran before shipping to the consumer if it's for diy mods I understand but when your charging almost 200 for a mod and for it not to work sucks but I got the reuleaux and have no problems so far hopefully it stays that way

[dna 200 battery cells reading to low and will not charge]

Yea i know it does suck bad i just ordered a turnigy 950 mah lipo with a xt30 connector and see if this mod will get some life.

[dna 200 battery cells reading to low and will not charge]

Tried doing that the vendor will not refund me and jd tech told me they just built the boxes not the board and this is the second unit I received from Longhorn vapor seems like I'm stuck with an expensive paper weight that I have not bin able to use not one single time.

[dna 200 battery cells reading to low and will not charge]

I just got my new dna 200 and the thing will not charge checked on escribe and the cells are really really low cell 1 is 0.02 cell 2 is 1.44 cell 2 is 2.50 now my mod is completely dead and will not charge or go onto escribe. It has a fullymax 900 mah lipo jd tech x200

[dna 200 mod not charging or detected by escribe]

Yea i tried that no luck i contacted longhorn vapor and they are going to exchange the device i hope the new device does not have the same problem. Also does evolve repair mods with the board or would i have to go through the manufacturer? 

[dna 200 mod not charging or detected by escribe]

I just purchased a dna 200 mod by jd tech, and the it does not want to charge or log on to escribe. When i got the device i updated the firmware then i changed some themes and i loaded sweet spot vapors files to wire profiles, from there everything was working fine and then my mod said check atomizer i unscrewed the rda made sure the post screws were screwed down then put it back on it started working again i then went back into escribe plugged in my device uploaded a profile then the computer shut off and now every time i plug the device to the computer the computer shuts off and the mod will not charge i have tried multiple usb wires and nothing. what should i do?