jschreiber
-
Posts
2 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Posts posted by jschreiber
-
-
Hi,
I was quite split on placing this in the bug forum or here, so I apologize if this is the wrong place.
I've noticed my Opus 200 reads the resistances of coils higher than they are reading on my IPV4 when I set the resistance as well as a multimeter that I borrowed some time ago to check (although not the most expensive one). The IPV4 is at 0.151 on a particular coil, multimeter at 0.155, and the Opus is at 0.18. I've noticed throughout the time I have had these tanks/coils on the Opus it has been reading higher resistances than the IPV4 by approximately .02 or .03. These coils are all rated for 0.15 ohm.
I realize this is a minuscule difference and the temperature control seems to be working great, but should it be doing this or is this even a problem? Could it just be different materials in the 510? Or could it just be the Opus being more accurate than the IPV4 and the multimeter?
Thank you,
Jeremy
Opus 200 Reading Resistance Too High?
in General Discussion
Posted
Sorry for my ignorance on this one but how can I short the 510?