[Discharge profiles for WisMec ReuLeaux]

Jaquith said:

[QUOTE=bo0st]Anyone have a battery profile for green 25r's?

Well I ran a Profile for the (aka my old) Samsung 25R's and the following Battery Profile is from a set + 1, same batch, batteries; the set have been paired for several; months in a Sigeli 150W Mod and the +1 from an old IPV 4 Mod. Ideally I'd much, much, prefer to use a brand new set of 25R's or any batteries. When I came home the test had completed, but I noted 3.30V, 3.35V, and a 3.41V .. that's not a 'good' example however the 3.07V test cutoff is good.

Under a 'Rated' 10A load 8.74 Wh*3 = 26.22 Wh vs 'Observed' 22.86 Wh or 3.36 Wh which is good but a new set probably would have been a tad better.

Battery Profile Samsung 25R http://www.filedropper.com/samsung25rprofile

Here's an overlay comparing the 3 batteries (pretty close over all):

 
Side-by-Side Wh, Cutoff, Profile:

 
[/QUOTE]


thanks Jaquith !  



I set mine 25Rs (new) to 23.08WH  and its working good !


best regards

[Discharge profiles for WisMec ReuLeaux]

Hi

anyone have discharge profile for Samsung 25Rs ?

thanks