[Good Lipo for CNC 1590g?]

Gm111 said:

[QUOTE=kwaz51]Looking for a good battery to replace the lipo that's currently in my box. It's an Ares 1000mah, 20C (20A) continuous at 77 x 35 x 17mm. It performs well but the battery life leaves something to be desired. I am not a modder, I had this box built for me, but I am capable of replacing the battery. 

I appreciate your guys' time and input. This forum has taught me many things in the few days since I've been here!

That battery is not good enough, recommended above 23 amps. I used a Turnigy nano-tech 1000mah 45c (74x35x19) battery soldered positive and negative straight to the board and it fits perfect just to let you know what size can be used .[/QUOTE]

i dont push the mod very hard so im not too worried at this point but i do plan on purchasing a better lipo, hence the reason for this thread! just trying to find a great lipo that will fit in this 1590g CNC box

[Good Lipo for CNC 1590g?]

i should add that anything 3mm thicker would require a gasket spacer in the lid for it to work, so staying as close to the stated dimensions as possible would be ideal!

[Good Lipo for CNC 1590g?]

Looking for a good battery to replace the lipo that's currently in my box. It's an Ares 1000mah, 20C (20A) continuous at 77 x 35 x 17mm. It performs well but the battery life leaves something to be desired. I am not a modder, I had this box built for me, but I am capable of replacing the battery. 

I appreciate your guys' time and input. This forum has taught me many things in the few days since I've been here!