[UWell Crown on Laisimo L1 and EFusion DNA 200]

BillW50 said:

Your post with EScribe Device Monitor screen shot also shows the live ohms increasing a bit as the temperature of the coil rises. I am guessing you are using SS in wattage mode. Thus the Laisimo is adjusting the voltage higher as the live ohms increases to maintain the same wattage.

This is correct. I'm fairly new to all this so I apologize for not understanding everything ahead of time. I figured that both devices would work somewhat the same.

[UWell Crown on Laisimo L1 and EFusion DNA 200]

I just tested this. It does check for the atomizer and will not fire. I also unscrewed while firing and it stopped.

[UWell Crown on Laisimo L1 and EFusion DNA 200]

The Laisimo does have voltage. It changes per hit and is around 5.11 and has gone up to 5.32 if I chain it.

[UWell Crown on Laisimo L1 and EFusion DNA 200]

 
This was a chain test. I have it at 65 watts right now and its doing fine. I wish I could do this with the Laisimo to see what its doing haha. I figured the .25 coils would have been fine around 80-100 watts but I guess not!

[UWell Crown on Laisimo L1 and EFusion DNA 200]

Hey all!

I have a weird problem that is probably escribe related. I noticed my coils are hitting better on my Laisimo L1 with no problems. However, if I put the same tank onto my DNA 200, I get dry/burnt hits. I'm running these in straight wattage and both have fully charged batteries. I don't get how it can work on one and not the other? Any suggestion from you guys would be appreciated. I'm running the .25 coils by the way around 80-100 watts. If you need more information, let me know. 

Thanks in advance!