[Error press up to continue]

I pulled the battery out completely disconnected and reinstalled it and I haven't seen that error in 48hrs

[Check Atomizer]

I think he talking about locking the device not the ohms

[Error press up to continue]

I am having the same problem. Same error every time I upload or download settings from escribe. I'm using software dated 8/7

[New coil or old coil]

blueridgedog said:

What is your percentage trigger for "new/old" in escribe?  It could be that when you set it down for a long period or it changes temp, that the change is enough to trigger it when you start again.

I suppose that could be the case but the other 12 DNA 200 mods I built didnt do this with the ohms locked. 

[ShapeWays]

Every order I have placed usually took 2 weeks to receive

[New coil or old coil]

I am still having this happen even on older and newer software with 2 of my mods I am, using Ni200 which is pretty much a Vape on

[Mobile version]

I was thinking more along the lines of Usb android.

[Mobile version]

I would love to see a mobile version of eScribe. Is there any plans on making a mobile version?

[New coil or old coil]

So the last 3 newer boards I have received when the mod powers off and I turn them back on they are always asking me if it is a New coil or an old coil, this didn't happen on any of the older dna200 boards I had. Anyone else notice this?

[Let's see your 200's!]

Kyle98750 said:

I present to you my overly excessive box mod:

   

The box contains a 120.99Wh (Max Amps 11.1V 3S 10900mAh) battery. That means that this battery has the capacity of roughly 14 18650s. Believe me, this box is a tank, it's quite large, heavy and awesome. I used the Mamu DNA200 faceplate from shapeways along with a screen holder and buttons. I used XT60 connectors for the battery and atomizer to make sure everything is removable, so that if I wish to, I can build a new enclosure (wood.) if I wish. 14 Gauge wiring for all the internals, except for the 12 Gauge coming off of the battery. I also applied JB Weld to all the solder joints to ensure they don't come off after everything is secured.

Specs:
-Hammond 1590WP1
-Max Amps 10900mAh, 11.1V 3s
-Fat Daddy Vapes V4 connector with the 30mm ring

What do you think? Excessive enough?

Nice brick, you shouldn't have to charge that for days.

[Let's see your 200's!]

FireBALL said:

Here is my final version of inspired case (rendered image).  Having it printed by shapeways

 

I bought 1 of these in all black an earlier version with the thinner walls, should be in the mailbox now.

[Let's see your 200's!]

JJVapes said:

[QUOTE=FireBALL]My take on a mod, as you can see it's a BOXER inspired design.  It's off to Shapeways, let's see how good it turns out

I'd buy this [/QUOTE] I did buy this it is being printed right now

[IS THIS TRUE EVOLV ?]

I know I have put around $110-125 in each of the 10 I built in various shapes and sizes, but hay that's the beauty of mass production you can bring the cost down.

[How many of you have a dead board?]

I had one arrived DOA, only powers on though eScribe still waiting on a response to send it in. Hopefully they can fix or replace it since I'm stuck using this sx350j chip

[help i need a box]

1 of my project boxes same box macz linked, just a little bigger than a 1590g box button hole drilled out with 1/4" drill bit square hole used a dremel.

[Let's see your 200's!]

adski said:

The tape that just keeps on giving Kapton

Lol nice trick

[Another Random Dead Board]

John said:

Yeah, yours is definitely not talking to the analog front end. Is your cell 3 tap solid, and the resistors closest to the USB connector on the right?

What do you think? Should I send it to you as I do not know what else I can do, this is the only 1 that didn't work from the start and all the others are still working great with no issues.

[Another Random Dead Board]

Picture of eScribe

[Another Random Dead Board]

John said:

Yeah, yours is definitely not talking to the analog front end. Is your cell 3 tap solid, and the resistors closest to the USB connector on the right?

Yeah I'm not sure but it is a 11.1V 3s 35c wired directly to the board with balance connector plugged in. If you need me to wire it back up I will, sorry I should have taken a screen shot with it plugged up though eScribe, here is some pictures. I resoldered the joints to the tap just now and plugged it up to eScribe here is a picture.

[Another Random Dead Board]

My board is not showing the battery on the display or on escribe 0 volts for pack power 0 volts on all 3 cells but the battery is working on my other 2 boards, any suggestions

[Another Random Dead Board]

Hey John, I sent you pm with a problem I'm having do you have any suggestions for me.

[Let's see your 200's!]

xevape said:

#2 in a 1590A

   

Video
https://instagram.com/p/50iEj3AWIS/?taken-by=xevape

Looks damn good a lot of compact power. The only thing I see wrong is the Usb port is sticking up out of the case. Other than that I love it.

[Different screen color from one 200 to another]

The seven I bought from Protovapor.com in 3 separator orders all were the same color.

[Let's see your 200's!]

Here is 1 of the 5 of my latest creations

[Let's see your 200's!]

xevape said:

I was not a fan of the onboard buttons....so I replaced them    @XEVAPE

    

Is that a Hammond 1590a? Man that is a tight fit. NICE WORK LOOKS GOOD. I'm fixing to start working on my 7th DNA200 and it will be in a 1590a I hope mine turns out that nice