[VT133 (dual 18650 battery curves)]

Thanks for the promt response;
it's a very strange behaviour; not sure which one prevails over the other; The Capacity/Cell Soft Cutoff or the CSV file;

So if I set any value in the Capacity field which is > 16 Wh then the meter reads lower and tries to charge it more, so like 89% at 4.2. If I set Capacity to 1 then it seems that the CSV takes over and under device monitor the Cell1 tries to exceed 4.2 to 4.21 and device seems not to let it and the meter on the board constantly shows charging at 100% 4.2Volts each.


Do you suggest I should run my battery analyzer? i want to avoid it 'cause at home it's not easy to set it up

Regards

[VT133 (dual 18650 battery curves)]

Hello folks,
thanks for providing the vtc4 and vtc5 profiles. I've uploaded the vtc5 one but the problem is that when the mod is charging it shows 4.2 Volts for each cell at 89% and keeps going, so I unplugged it.
What did i do wrong?
I've replaced the Wh to 17.77 and Cutoff to 3.02

Thanks in advance