JamesVally
-
Posts
27 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by JamesVally
-
-
I even went to using Photoshop CC
-
But when i try too match the other text screens they don't match up with Sans Serif
-
I can't match the text I have zero artistic ability. I the first one as a base to add the text but I just can't get it right. If giz_60 could work his magic or anyone, fix the three bottom screens with the Vaperz Cloud art and there matching text. I would be grateful.
James
-
The first image is how I need the text to match the second is a blank with just the cloud, the three left are the ones that need to be matched. You guys are the best that do this I appreciate it so much!!!!!!!
James Vally
-
Wholly shit you guys are so dammn awesome. I wish I had the ability to have the artistic skills thank you so much gi_60!!!!!!!
James
-
I was wondering if someone could create a custom screen for the secondary one that replicates the Triade DNA Font with the symbol. Where it'd have the symbol far left and then Triade DNA250 after. I've looked all over and couldn't find one. An I know there's a lot of people in here with talent for making these custom screens. it'd be most apprciated.
thank you in advance,
James Vally
-
I have a brand new Lost Vape Tirade DNA 250 setup it up how I want it. Using Samsung 30Q 3000mah batteries set watt hours at 33.3. Have four brand new sets all married but the battery meter always shows empty. Also have samsung 25R 2500mah set at 27.75 and it does the same thing all fully charged with brand new charger show I can see there at 4.20 when they come off the charger. But the battery meter always shows empty. What is the problem and how can I fix it show I can see how much battery % I have left? Pro's please help. I've attached the .ecig file to see if anyone see's a problem or knows how to fix this maybe its a firmware problem?
James Vally
Vaperz Cloud DNA with Custom Touches - Samsung 3000 30qr WITH 33.3wh - 1.ecig
-
Thank you for the help retird
-
So Ive been having serious problems with my Lost Vapes Efusion DNA 200. The screen scrambles randomly witha snow like halfway down but you can still see half the text. Ive contacted Lost Vapes but they won't help at all. They say its discontinued etc. I'm hoping evolv can help fix it somehow. I've heard you guys are food about fixing your boards when the company's that are using them won't. I'll attach a two of the problem on the main screen. This happens while navigating through any area, especially while trying to lock the watts to change to another tank setting. Annthe temp control is just not working how it should, compared to my friends Reuleaux DNA200 or his VaporShark and we are using the same .csv files etc. so it should be the same. An frommthe get go the micro usb charge port has never been right, I've tried multiple cords and ever single one I have to mess with so it charges or lets me connect to escribe. An Lost Vapes just refused to help me. Please, please; please help me Evolv this is my only vape mod and it was a large purchase for me.
-
Yea the graphs with ni200 and ti builds have a pretty up tiramp to set temp and then flatlines perfectly at set temp. Where SS builds have a smooth up ramp pending on your preheat settings and how hard etc. then bounce around set temp range by about 10-30*. Its just one of the things with temp but whats weird is you don't feel those while vaping tank/rda. I still love ss316l-430.
-
Don't get me wrong although its spikes around on the graph SS is the best vape for me on my dna 200 warm and super dense with my 25mm griffens and Boreas tanks. Though i like kanthal/ni80 aliens, and fused claptons, or fused stapled claptons. At least with rda's like the velocity or the petri
-
Well i promise a SS curve won't look smooth like that on the top. Like ni200.
-
Thanks bill got my tanks rounning smooth and back to normal now!!!!
-
I sat there and tweaked the temp to 420, watts to 50 and then preheat watts, how hard,!and long and I think I got all tanks running smoothly
-
Using the Device monitor the live ohms the resistances of each rta tank/coil is stable
-
No batter cells are all reading good voltage levels. I tried the preset ones and the steam engine ones. Soni beginning to wonder if its the board and Lost Vape basically told me i was on my own.
-
It also has been doing it with straight ni200 coils. All these are RTA's. But if I use kanthal base and ni200 I don't have a problem. I checked for shorts loose conections all grub screws are good. Im at a loss right now. Maybe the board is going south. I reached out to Lost Vape they basically didn't want to help since they're focusnon the triad an halcyon dna squonker....
-
Nope the resistance stays the same .33ohms and I locked it also. Even when I don't the resistance doesn't change? I can't figure it out. It was also doing this with normal ni200 dual coils. I made sure all grub screws where tight. The wicking is perfect. I'm confused.
-
So I have these SS clapton coils from advanced vape supply run duals that ohm out around .34-.35 ohm in griffen 22mm, griffen 25mm, and Boreas- with both decks. It's set on temp control 420F at 50w, 75w preheat, Hard 7.1 on slider at .25 secs. For each tank setup profile. When I first screw the tanks in and it asks me if its a new coil setup I hit +. An vapes likes its supposed to. But if I set it down for a bit it have noticeable power loss because I can tell the warm and vape production is off. i run in vw/ww mode its fine. I knownits not a connection problem in all three tanks. I took them all apart cleaned the contacts, 510 connector and made sure 510 screw was firm in place. The mode is a Lost Vape Efusion DNA 200 running latest firmware. With .csv file for 316L Elite and the .csv file i made on steam engine form 316L claptons I got from Advanced Vape Supply.
-
When i go to real time monitor my device. It shows verything but the actual temperature of the coil/wire Im using. It just shows a ? This is of a Efusion Lovst Vape DNA 200. Im wondering if the micro usb is messed up somehow. It'd really disappoint me in the chips ability to be used decently. Ive barely had this mod. I tried to contact the manufacturer. But they just told me the model has already been discontinued. This mod sits at home only. Used the griffin tank and Velocity RDA and the Uwell Rafale. Never been dropped, nothing. Im at a loss for what to do?? James
-
You guys where right on I downloaded a Escribe from evolv but it wasn't the latest one like I thought it would've been. So once I installed that version it worked like a charm. Thanks all James
-
-
I downloaded the LostVape1300mah.ecig file for vapor dna like it said too. Downloaded escribe installed as admin ran as admin everything went fine. Even updated battery settings like said too. But when I go to File-Open and then select LostVape1300mah.ecig file to get official settings updated it keeps saying unsupported file. Even though it is a .ecig file please please help
-
What good tanks have have a c coil .csv files to better tcontrol TC etc and the curves? Please help
crown 3 temp on dna 200
in General Discussion
Posted
Isn't it SS316L just use that profile. If it's not working go to steam engine look up the details of the coil for example is it a parallel coil, clapton inside. That then use the correct wire type as 316 L Elite always works for SS316L