Wolf_7
-
Posts
4 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Posts posted by Wolf_7
-
-
it's a .5 reading at .7 so Im assuming it's not tight enough.ChunkyButt200 said:one thing to do even without using atty analyzer is see if your coil is reading correctly on your lava box. if they're rated on the package as 0.25 (just an example) and your mod is reading it as .30 or above then you have a poor connection somewhere, whether it be the coil, where the coil screws in to the base or where the base screws into the 510 or even the 510 itself.
what to look for in AA is basically the same thing, high ohms and/or if you see the "?" instead of a reading. "check atomizer" means the mod is losing connection to the atty, a complete disconnect. also, make sure the spring loaded 510 pin is......still "springy" and moves freely up and down. i have heard of one person here crushing their 510 connector pin permanently down on their lavabox from screwing down an atty that had a very long 510. -
okay I will try watching them in escribe, what should I look for with the ohms exactly. A lot of variation or super consistencyChunkyButt200 said:welcome to the forum wolf_7. most likely something with your top tank or the tank itself is not making a good connection to the mod. try another tank. if the problem goes away, it's the top tank that's the problem. if the problem persists, there could be something wrong with mod's 510. possibly a stuck positive pin.
make sure the coil is screwed in tight, and the tank tight to mod.
you can also open atty analyzer in escribe and check your atty's stability. try slightly unscrewing the tank on and off a little while watching the ohms. also rock the tank back and forth while it's screwed tightly on the mod and see what the ohms do. -
Hey everyone, I have a lava box dna 200 bone white, with a kanger top tank mini. It recently came in the mail( like yesterday) and almost 80% of the time it says check atomizer. Any feedback will be helpful thank you
Check atomizer
in Connectors, Components, and Accessories
Posted